|
SS-331 Desoldering Station Electric Desoldering Iron Gun Tin Suction Pump 220V Does not support 110V
Description SS-331 LCD desoldering station is efficient desoldering tool with a built-in vacuum for through-hole boards and components. It is a thermostatically controlled desoldering station that provides low cost and high performance. Ergonomically friendly structure allows one hand operation, only takes a few seconds per pin, more safe, efficient and comfortable.
Features - High power desoldering tool with vacuum - Efficient operation, quick and easy - Microprocessor Controlled, provides accurate temperature control from 160 to 480°C - Ceramic heater, provides fast heat up, fast recovery and high insulation resistance - Designed with a quality heating element, it provides higher performance and longer lifetime than traditional type
- Built-in high power 600mmHg air pump, particularly for lead-free desoldering of multilayer boards - Large LCD display - Quick and easy to set the desired temperature and check the actual temperature.
- Fahrenheit or Celsius unit selection. Specification Type: Electric Desoldering Gun Model:SS-331 Voltage: 220V NOT support 110V） Soldering Power:90W Power Consumption:140W Temperature:160°C ~ 480°C Vacuum Pressure:>600mm Hg Heating Element:Ceramic Heater Size: 172*135*190mm
Weight: 2.0kg
SS-331 Correct Use 1.After each work, it is recommended to suction 3-5 times and empty the residual tin in the tube; 2.If the interval between use is about 20 minutes, it is recommended to clean the steel pipe with a needle after air suction; 3.It is found that the suction is reduced during use, please clean the steel pipe with a needle; 4.If the frequency of use is very low, it is recommended to adjust the tin gun to about 200 degrees, and then to the working temperature when using;
5.When the tin slag in the tin storage cylinder is about 1/2, it should be cleaned in time. When the filter cotton is found to be hardened, it needs to be replaced in time. |
|
What's in the package: 1x Electric Desoldering Gun 3x Nozzles 4x Filter sponges 3x Needles 1x User manual |