• REPLACEMENT ENGINE & TRANS SPLASH SHIELD 
  • Replacement Engine and Transmission Splash Guards perform just like the original to protect your engine compartment from dirt, mud, water, and other contaminants. Each Replacement engine splash shield is made to factory specifications, allowing you to easily restore your vehicle to its original condition. 
  •  
  • Description

    • Tech_auto_parts

    Best choice of motor parts

    Fits Audi A4 S4 B8.5 B8 2.0 3.0L Engine & Trans Splash Shield Under Tray Protect

    REPLACEMENT ENGINE & TRANS SPLASH SHIELD 

    Replacement Engine and Transmission Splash Guards perform just like the original to protect your engine compartment from dirt, mud, water, and other contaminants. Each Replacement engine splash shield is made to factory specifications, allowing you to easily restore your vehicle to its original condition. 

     

    Description

    • LASER CUT - Precise cuts to fit stock mounting points CLEARANCE - The Clearance is the same as the OEM, with a higher quality material: 2.2MM Aluminum
    • RIGIDITY - Offers better protection while strengthening bumper support for better stability at high speeds
    • MULTI PIECE DESIGN - Won't bend the whole thing if you hit a curb, and can replace only the front piece. Easier to work on your engine.
    • OIL DOOR - The OEM shroud offers little access to the filter. This built in oil door is accessible by removing 2 simple bolts.
    • VENTED DESIGN - Helps to aid with air flow and heat removal

     

    Feature

    Condition: 100% Brand New

    Color: Black

    Material: Aluminum Magnesium

    Thickness：2.2MM(0.8inch)（Featured Thicknesses）

    Attachment Method: Screw-on

    Placement on Vehicle: Front, Lower

     

     

    Fits

    For 2009-2016 Audi A4 S4 B8.5 B8 3.0L 2.0L Engine

     

     

    Package

    2 x Skid Plate (As Shown In the Picture)

     

     

    09-16A4/A5 Installation Drawing

    THE ENGAGING PROTECTION CTION PLATE

     

    Installation Steps

    Step 1, remove the original guard, 1.2.3.4.5.6.7.8.12.13.14.15 for metal clamps, hexagonal fixed

    Step 2. 9.10.11 13-15 models for the clip, screw package inside the 3 long screws fixed, 09-12 models screw package long screws on the through the next fixed, the following nut

    Step 3, tighten the screws

     

    Installation Show

     

     

    FAQ:
    I purchased by mistake, how do I cancel the order?
    Please contact us ASAP. If the item has not been shipped out we can cancel the order for you. If the item was shipped out you can refuse the package and wait for the item to return to us.

    I received your item but it does not fit or is defective
    Please contact us so we can assist you on the matter.

     

    About Us

    Welcome to order our products, we are responsible seller, we have our own factory for production, our products are favorite by many customers. We will ship the products to you within one day after ordering. If you are not sure whether the product is suitable or not, you can contact us directly to inquire, and you can ask us any questions at any time. Meanwhile, please pay attention to the message after ordering, we will check whether the product is suitable for you within one day, if the goods and the vehicle do not fit, we will notify you and suggest you to buy the suitable product, to avoid unnecessary losses caused by you buying the wrong product. Our products have gone through rigorous factory testing, they are excellent products, you can buy with confidence, please rest assured that we offer a lifetime warranty.

     

    Our Certificates:

     

    Our Factory：

     


    Item Specifics
    Brand CARBOLE
    Type Skid Plate
    Placement on Vehicle Front, Lower
    Material Aluminum Magnesium
    Features Powder Coated, Vented, Removeable, Car Wash Safe, Washable
    Manufacturer Part Number For 2009-2016 Audi Engines
    OE/OEM Part Number For 09-16 Audi A4 S4 B8.5 B8 3.0L 2.0L
    Color Black
    Universal Fitment No
    Items Included Mounting Hardware
    Vintage Part No
    Performance Part Yes
    Thickness 2.2MM/0.08inch
    Manufacturer Warranty Lifetime
    Attachment Type Screw-on
    Interchange Part Number For 09-16 Audi A4 S4 B8.5 B8 3.0L 2.0L

    Payment

    1.We can accept Credit card, Debit card, Apple Pay, Google Pay,PayPal ,visa,or master card,thank you.

    2.Payment must be received within 7 days after the auction closes. Unpaid orders will be filled after 7 days.

    3.Please note that if your order is more than three months old and you want a lifetime warranty, you will need to pay for shipping to get a brand new one.

    Shipping
    1.Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).
     
    2.All orders will be shipped within 1 business day after payment cleared.
     
    3.Import duties and any other fees are not included in the price or shipping fee.
     
    4.We ship all items to United States only. International shipping is provided by Ebay global shipping program and is calculated once the items are placed in the shopping cart.
     
    ICT Billet LLC is not responsible for missing or lost packages once they are picked up by the carrier.
    Returns

    1. It is the customer's responsibility to ship the item to us in a new, unused condition within the 60-day return period.

    2. If you decide to return your item for any reason, please return the item with your receipt or packing list to the address below. Pack all items carefully to avoid damage during shipping. Items returned or damaged after 60 days will not be refunded. These items will be returned at the buyer's expense. Refunds will be processed promptly when the package arrives.

    3. If it is caused by our mistakes, we will not charge the replenishment fee, and we will try our best to correct it. Pictures will be requested to demonstrate the problem. This helps to speed up the process and reach a favorable solution.

    Contact Us

    If you have any questions, please feel free to leave a message through eBay. We will handle it for you as soon as possible.

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction!    FEEDBACK IS VERY   IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that  we can satisfactorily address your concerns.

    It is impossible to address issues if we do not know about them!

    Tech_auto_parts

    Best choice of motor parts

    Fits Audi A4 S4 B8.5 B8 2.0 3.0L Engine & Trans Splash Shield Under Tray Protect

    REPLACEMENT ENGINE & TRANS SPLASH SHIELD 

    Replacement Engine and Transmission Splash Guards perform just like the original to protect your engine compartment from dirt, mud, water, and other contaminants. Each Replacement engine splash shield is made to factory specifications, allowing you to easily restore your vehicle to its original condition. 

     

    Description

    • LASER CUT - Precise cuts to fit stock mounting points CLEARANCE - The Clearance is the same as the OEM, with a higher quality material: 2.2MM Aluminum
    • RIGIDITY - Offers better protection while strengthening bumper support for better stability at high speeds
    • MULTI PIECE DESIGN - Won't bend the whole thing if you hit a curb, and can replace only the front piece. Easier to work on your engine.
    • OIL DOOR - The OEM shroud offers little access to the filter. This built in oil door is accessible by removing 2 simple bolts.
    • VENTED DESIGN - Helps to aid with air flow and heat removal

     

    Feature

    Condition: 100% Brand New

    Color: Black

    Material: Aluminum Magnesium

    Thickness：2.2MM(0.8inch)（Featured Thicknesses）

    Attachment Method: Screw-on

    Placement on Vehicle: Front, Lower

     

     

    Fits

    For 2009-2016 Audi A4 S4 B8.5 B8 3.0L 2.0L Engine

     

     

    Package

    2 x Skid Plate (As Shown In the Picture)

     

     

    09-16A4/A5 Installation Drawing

    THE ENGAGING PROTECTION CTION PLATE

     

    Installation Steps

    Step 1, remove the original guard, 1.2.3.4.5.6.7.8.12.13.14.15 for metal clamps, hexagonal fixed

    Step 2. 9.10.11 13-15 models for the clip, screw package inside the 3 long screws fixed, 09-12 models screw package long screws on the through the next fixed, the following nut

    Step 3, tighten the screws

     

    Installation Show

     

     

    FAQ:
    I purchased by mistake, how do I cancel the order?
    Please contact us ASAP. If the item has not been shipped out we can cancel the order for you. If the item was shipped out you can refuse the package and wait for the item to return to us.

    I received your item but it does not fit or is defective
    Please contact us so we can assist you on the matter.

     

    About Us

    Welcome to order our products, we are responsible seller, we have our own factory for production, our products are favorite by many customers. We will ship the products to you within one day after ordering. If you are not sure whether the product is suitable or not, you can contact us directly to inquire, and you can ask us any questions at any time. Meanwhile, please pay attention to the message after ordering, we will check whether the product is suitable for you within one day, if the goods and the vehicle do not fit, we will notify you and suggest you to buy the suitable product, to avoid unnecessary losses caused by you buying the wrong product. Our products have gone through rigorous factory testing, they are excellent products, you can buy with confidence, please rest assured that we offer a lifetime warranty.

     

    Our Certificates:

     

    Our Factory：

     

    Item Specifics
    Brand :CARBOLE
    Type :Skid Plate
    Placement on Vehicle :Front, Lower
    Material :Aluminum Magnesium
    Features :Powder Coated, Vented, Removeable, Car Wash Safe, Washable
    Manufacturer Part Number :For 2009-2016 Audi Engines
    OE/OEM Part Number :For 09-16 Audi A4 S4 B8.5 B8 3.0L 2.0L
    Color :Black
    Universal Fitment :No
    Items Included :Mounting Hardware
    Vintage Part :No
    Performance Part :Yes
    Thickness :2.2MM/0.08inch
    Manufacturer Warranty :Lifetime
    Attachment Type :Screw-on
    Interchange Part Number :For 09-16 Audi A4 S4 B8.5 B8 3.0L 2.0L


    1.We can accept Credit card, Debit card, Apple Pay, Google Pay,PayPal ,visa,or master card,thank you.

    2.Payment must be received within 7 days after the auction closes. Unpaid orders will be filled after 7 days.

    3.Please note that if your order is more than three months old and you want a lifetime warranty, you will need to pay for shipping to get a brand new one.

    1.Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).
     
    2.All orders will be shipped within 1 business day after payment cleared.
     
    3.Import duties and any other fees are not included in the price or shipping fee.
     
    4.We ship all items to United States only. International shipping is provided by Ebay global shipping program and is calculated once the items are placed in the shopping cart.
     
    ICT Billet LLC is not responsible for missing or lost packages once they are picked up by the carrier.

    1. It is the customer's responsibility to ship the item to us in a new, unused condition within the 60-day return period.

    2. If you decide to return your item for any reason, please return the item with your receipt or packing list to the address below. Pack all items carefully to avoid damage during shipping. Items returned or damaged after 60 days will not be refunded. These items will be returned at the buyer's expense. Refunds will be processed promptly when the package arrives.

    3. If it is caused by our mistakes, we will not charge the replenishment fee, and we will try our best to correct it. Pictures will be requested to demonstrate the problem. This helps to speed up the process and reach a favorable solution.

    If you have any questions, please feel free to leave a message through eBay. We will handle it for you as soon as possible.

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction!    FEEDBACK IS VERY   IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that  we can satisfactorily address your concerns.

    It is impossible to address issues if we do not know about them!


    All rights reserved.
    Datacaciques