PHOTOMICROSENSOR Amplified Light-Modulation Long Distance- Retro-Reflective Dark-On small flange-mounting 1.1" tall plus three leads

• Photomicrosensor with light modulation for reduced external light interference.

 • Easy adjustment and operation validation with an operation indicator (lights when light is incident).

 • Wide operating voltage range: 5 to 24 VDC

• Supports connection with Programmable Controllers (PLCs).

• Easy-to-wire connectors assure easy maintenance.

Power supply voltage 5 to 24 VDC ±10%, ripple (p-p): 5% max.

Current consumption Average: 15 mA max., Peak: 50 mA max.

Response frequency 100 Hz

Control output: 5 to 24 VDC, 80 mA load current with a residual voltage of 1.0 V max., 10 mA load current with a residual voltage of 0.4 V max.

Light source: GaAs infrared LED (pulse lighting) with a peak wavelength of 940 nm Indicator Light indicator (red)

Light-receiving element: Si photodiode (Maximum sensitivity wavelength: 850 mm)

Ambient illumination: 3,000 lx max. with incandescent light or sunlight on the surface of the receiver

Degree of protection: IEC Standard IP50 (excluding terminal section.)

Ambient temperature Operating: −10 to +55°C

Storage: −25 to +65°C

Ambient humidity Operating: 5% to 85%

Storage: 5% to 95%

Permissible bending

Radius of Fiber Unit 25 mm

Maximum fiber length Through-beam: 180 cm

Reflective: 100 cm

Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 h each in X, Y, and Z directions

Shock resistance Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions

Cable 2 m max. (Thickness: AWG24 min.)

Weight Approx. 3.0 g

New - Rare – Difficult Component to Find

Made in Japan

Alternates: 83F1995, 653-EE-SPZ301A

Discounts provided for purchases of 2, 3, or 4 and more.