Kicker 11HS8Hideaway™ compact powered subwoofer with 8" sub and 150- watt amp

Bass that'll fit almost anywhere

When Kicker set out to make the Hideaway™ compact powered sub, they wanted to make a subwoofer that could fit almost anywhere and still deliver the performance that made Kicker famous. At just over 3" tall, the Hideaway™ will fit under many seats and in storage areas where you don't usually find powered subs. The powerful, built-in 150-watt RMS amplifier delivers strong bass that'll add depth and punch to any type of music.

Big performance

The 8" woofer can hit low notes that'll really rock your ride, especially when the Hideaway™ is mounted in the vehicle's interior. The included remote control bass knob will let you adjust the bass level on the fly. Kicker even included Nylon straps with Velcro® fasteners to mount the sub, plus a quick disconnect harness with power and signal wiring that'll make the installation easier.

Installation Note: The Hideaway™ sub will accept preamp-level signals, but you'll need to connect this adapter to the sub's 8-foot signal harness so you can plug it into your receiver's preamp outputs.


Product highlights:

  • compact powered subwoofer
  • 8" woofer
  • built-in 150 watts RMS amplifier
  • frequency response: 25-120 Hz
  • variable low-pass crossover (50-120 Hz)
  • variable phase control (0 or 180 degrees)
  • bass boost control (0dB to +6dB)
  • speaker-level inputs (will also accept preamp-level signal using optional adapter, item 20646KiSL, sold separately)
  • auto turn-on switch
  • wired remote control
  • dimensions: 14-1/4"W x 3-1/4"H x 9-3/8"D

What's in the box:

Kicker 11HS8 owner's manual

If you need assistance accessing this owner's manual, please give us a call.
  • Amplified subwoofer
  • Wiring harness (17.5' Power input/ 8' Speaker level input/ 2' Ground/ 2' Remote turn-on)
  • In-line fuse holder
  • One 15 amp ATO fuse (installed in fuse holder)
  • Two 10 amp ATO fuses (1 installed in the chassis of the unit/1 spare)
  • Remote bass level control
  • 20' Remote cable (3.5mm stereo mini-plug on both ends)
  • 2 Velcro mounting straps
  • Two 10-12 gauge crimp-on ring terminals
  • One 10-12 Gauge butt connector
  • 4 Flat washers
  • 4 Mounting brackets
  • Two 3/8" Self-tapping pan head screws (to mount wired remote)
  • Four 3/4" Self-tapping pan head screws
  • Eight 3/4" Self-tapping flat head screws
  • Four 1-3/8" Self-tapping flat head screws
  • Mounting template
  • Owner's manual (English/ Spanish/ German/ French)