Ueevii Universal Wireless Bridge Bracket Mount, Pole and Wall-Mounted Mount for Outdoor Point to Point AP Access Point Client Bridge CPE,2-Pack

About this item

2 installation methods: This wireless bridge bracket mount can be installed on a pole or wall-mounted, and you can choose to install it according to your needs, which is very convenient for you
150-degree adjustment: The rod of the wireless bridge bracket mount can be adjusted up and down by 150°. After you install the CPE, adjust the angle of the rod to receive signals of different strengths
Firmness: Wireless bridge pole mount is designed with non-slip gears. After adjusting the angle of the rod, only need to twist it lightly, and the rod will be firmly fixed. And this pole mount is equipped with 2 hoops to firmly fix the mount on the rod
Waterproof: The surface of this pole mount is painted, and the top is equipped with a waterproof cap, which gives this bracket mount a good waterproof performance. It’s very suitable for outdoor use
Wide application: This wireless bracket mount can be applied to all Ueevii wireless bridges. And for its length and firmness, the pole mount is also suitable for most of wireless bridges on the market, some APs can also use it

Product Description

CPE8881-2.5KM-450Mbps:

Technical Support & Note: The installation of this device requires some network knowledge. When you cannot connect to them, please contact us or look for a professional to assist. 2 CPEs have been paired before sending it to you, you don’t need to pair them again. When the CPE is reset, IP of this setting is 192.168.0.1. After resetting, you can reset the IP address after accessing through 192.168.0.1. Get the latest version of the PDF manual by contacting us.

【What 8881 CPE is】Wireless bridge is a 450Mbps PoE output outdoor wireless WiFi bridge support 2.5KM 5GHz long-range WiFi extender with LED indicator meet with multiple wireless transmission scheme demands. The transmission speed between 2 bridges max is 450Mbps. The highest network speed that can be achieved max is 100Mbps. Outdoor wireless CPE bridge waterproof, dustproof, lighting protection. Operating temperature: -20℃-70℃/storage temp: -40℃-85℃.

【Point to Point Connection Mode】Multi-Mode wireless wifi bridge with an ethernet port and LED indicator. Support wireless AP, wireless signal transmit before 2 houses with 2.5KM distance.

【 How To Use Product 】Wireless bridge LED indicator can show signal strength, easy to set via computer. Setting CPE master mode as AP mode, slave mode as Client mode. Click " Scan" in the settings of the slave mode, scan to the CPE SSID of the master mode to be connected, and then make the connection settings. It transmits via wireless signal, reducing the trouble of wiring cable.

【Widely Applications】Any place required security monitoring by cameras Point to Point/Multi-Point connection Client Bridge for Elevator Monitor, surveillance networks. Outdoor CPE Connect an IP Surveillance Camera to a secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage.

Product Description

Package Included:

2*POE Power Adapter (DC 12V 1A)

4*Plastic Hoop

1*Quick Start Guide

2*8881 Bridge

Why Choose CPE8881 Wirelss Bridge?

5.8G 100Mbps Data Rate

5.8G 450Mbps wireless speed ensures high speed internet access and more end users access

High Gain Antenna for More Range

Built-in 14dBi dual-polarized directional antenna (horizontal lobe 60º vertical lobe 25º),stronger signal strength, more wireless coverage

Power over Ethernet - WAN Port support passive PoE

CPE8881 has integrated passivePower over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available.

Note: This wireless bridge is powered by a PoE adapter through a network cable, so does not require a DC power supply. The DC power adapter and cable are not included in the package.

CPE8881 is an 5.8G outdoor CPE with LED display. it work in pairs for point to point connection,point to multi connection,make more IP camera can access into it to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks.

CPE830-3KM-1000Mbps:

Wireless Bridge for Easy Network Expansion,5.8G Point to Point Extending WiFi to Outbuildings,Outdoor WiFi Network Bridge W/ 1000Mbps RJ45Port and 16dBi Antenna,PoE Powered, IP65 Waterproof,2-Pack

About this item

Effortless Setup: CPE830 wireless bridge simplifies pairing method with easy-to-use dip switch pairing, eliminating the need for complex configuration(IP,channel,scan). No specialized networking knowledge is required - simply pair and use.
Expand Network Wirelessly: Extend your WiFi network wirelessly to outbuildings such as barns, shops, and garages with outdoor point to point wireless bridge, effortlessly connecting remote areas to your main network hub,building to building wifi extender.
Enhance Surveillance Coverage: Seamlessly extend the coverage of your surveillance cameras to areas like yards, driveways, warehouses, and farms with point to point outdoor wifi bridge, ensuring comprehensive monitoring and security.
High-Speed Transmission: Point to point wireless bridge outdoor utilizing advanced 5.8G 16dBi antenna transmission technology, our bridge delivers lightning-fast network speeds, easily get wired speeds ranging from 100Mbps to 1000Mbps.
Save on Subscriptions and Wiring: Say goodbye to costly network subscription fees and the hassle of laying Ethernet cables. Ueevii wireless bridge provides a cost-effective solution for rapid network expansion without the need for additional wiring.
Expert Support and Warranty: Count on UeeVii dedicated team to promptly address any issues and provide efficient solutions. Enjoy peace of mind with a hassle-free 1-year warranty and easy WiFi bridge replacement.

Product Description

UeeVii 5.8G CPE830 Gigabit Wireless Bridge with 48V PoE

Share your home internet to any second building on your property—be it a garage, barn, warehouse or shop

The highest achieved Internet speed is 433Mbps

No more laying Ethernet cables, and no extra network subscription fees

One Key Paring


Step 1:Set the bridge Dial a bridge to A(Master Bridge) and the other bridge to B(Slave Bridge)	Step 2:Set the channel Each time you short press the "Reset" key,the value of each digital tube increases by one (0-9-A-F cycle),pair two bridges with the same value	Step 3:Pairing successful The signal strength light turns on to indicate successful pairing

Applications Across Multiple Scenario

CPE850-5KM-1000Mbps:

Point to Point Wireless Bridge Outdoor,UeeVii CPE850 5.8G 1200Mbps 5KM CPE for Extend Network to Outbuildings Barn Shop Garage with 16dBi WiFi Antenna 24V PoE Power IP65 Waterproof 2-Pack

About this item:

5.8G Gigabit WiFi Bridge & Fast Speed: CPE850 Gigabit WiFi bridge is a 5.8G long-range WiFi extender outdoor CPE with digital tube display. The bridges built-in one 100Mbps port and one 1000Mbps port, the maximum transfer speed between 2 bridges is 1200Mbps. The maximum achievable maximum network speed is 1Gbps.

Plug and play&Easy to Use: This outdoor point-to-point wifi bridge has been paired at the factory and can be directly connected to use. The long range wifi bridge support point-to-point, point-to-multipoint application. Point-to-point pairing can be done by dialing a code without entering the GUI, and it can be automatically paired when the power is restored after a power failure, which is very simple to use.
5KM Wide Range: The outdoor wifi bridge point to point built-in a 16dBm directional antenna, the maximum 27dBm can automatically adjust the power to adapt to environmental changes, the transmission distance can reach 5km (barrier-free), and the actual application distance should be less than 5KM. Trees will not block the transmission speed of peer-to-peer internet wifi bridges, suitable for shops, warehouses or garages near your home

Network Expansion & Surveillance Expansion: This point-to-point internet bridge easily helps you extend the network range to a second building (barn, shop, warehouse, garage), or cordlessly extend the IP camera surveillance range. WDS networking mode, video network dual compatibility. IP65-rated weatherproof enclosure for continuous operation in harsh outdoor environments, ideal for outdoor use

Support POE power supply: support 24V POE power supply, easy to install and deploy, simplify construction. The ueevii internet bridge performs in-depth protocol optimization for cordless video surveillance transmission to ensure high-speed video transmission, smooth video surveillance, and in-depth optimization of the underlying cordless driver. It adopts 5.8G IEEE 802.11ac single-frequency cordless transmission technology, which has stronger anti-interference ability and stability.

How to Access and Setting the Wireless Bridge CPE Through Computer Access:

Step 1. Use a PoE adapter to power the wireless bridge through a network cable. Pay attention to the "PoE" and "LAN" ports marked on the PoE adapter, and power is supplied by POE instead of a DC power interface.

Step 2. Use a network cable to connect the CPE "LAN" port, connect the network cable other ends to the PoE Adapter "POE" port, use another network cable to connect to the "LAN" port of the PoE adapter, and connect the other end of the network cable to the computer's "LAN" port.

Step 3. Find the number of the Wireless Bridge CPE digital display tube. For example, the number is 1 and the CEP is the A master bridge, then the IP of this CPE is 192.168.255.101; if the CPE is the B slave bridge, then the IP address of the CPE is 192.168.255.201.（There is a table corresponding to a number and IP in the manual）

Step 4. Very important step: Modify your computer's IP address, change your computer's IP address to 192.168.255.xxx(192.168.255.xxx cannot be the same as the IP of the CPE), make your computer's IP and the bridge's IP address be on the same network segment so that you can access them. Please refer to the manual to modify the computer IP address step or Google searches how to modify the computer IP address, it is very simple.

Step 5. After you modify your computer's IP address, you open the computer browser and enter the IP address of the wireless bridge to access. For example, enter 192.168.255.101 to access.

Step 6. Enter the account password "admin/admin" to access, and set it after successful access.

How to find and change CPE850 WiFi SSID and password?

1. Find the WiFi hotspot password of CPE850, path: Setting-->Wireless--> Name(SSID) and Password.

2. Enter the new SSID and password and save.

Product Description

Extend Your Network to Next House

Extend Your Network to The Barn

Extend Monitoring Range to Your Garage

Extend your Monitoring Range to The Elevator

UeeVii CPE850 WiFi bridge is widely used in warehouses, farms, and house lane monitoring systems. Point to point extend network WiFi range, extend the network in the house to your barn, garage, church, warehouse, and even neighbor's house through wireless bridge signal transmission.

CPE850 is a 5Km 5.8G wireless transmission equipment. It uses wireless communication technology to transmit network data using air as a medium to carry out long-distance PtP or PtMP interconnection. The working data link layer realizes the interconnection and transmission of local area networks.