EN / US
Welcome to our store / workshop!
Drawing on our experience as product designers, 3D modelers and prototypists, we offer technical and aesthetic solutions for modelers, miniature worlds and collectors, in 3D printing.
PRESENTATION OF OUR PRODUCT:
This magnetic steering guide is THE BEST DESIGN for reliable use of Faller Car System / Wiesmann Car Motion solutions.
It can be use on magnetic tape as well as Faller / Classical wire.
Compatible for 1/87 truck / bus and 1/64 car wheels with no limits of wheel size !
It is not recommanded for 1/87 cars because the magnets would be too strong for light cars.
It usually doesn't touch the ground (if the steering guide is nicely screw) so it reduces the use of your layout, increase the autonomy of your vehicle, reducing the noise and the possible crash due to unperfect road surface.
Nice compacity allowing the best road handling, no understeer, no crash !
No need to bend the piece to adjust the adherence, you can directly adjust the high of the steering guide in slippering the magnet in the guide or in unscrewing a few the steering guide. You can also add one of the other magnet we provide in this lot stacked under the first magnet, if you plan to use large size wheels (more than 13mm in diameter)
The PLA and the way it is printed provide the best shook resistance. It is impossible to break it in half without a cutting plier.
Heavily tested in intensive conditions. This solution is adopted for very long range of use even on used and unperfect layouts.
CONTENT: WHAT YOU RECEIVE
ONE PIECE STEERING GUIDE printed in 3D (PLA) then assembled by hand, with a 3x2mm neodyme magnet
+ 4 EXTRA NEODYME MAGNET FOR REPLACEMENT / ADJUSTMENT (2pcs 3x2mm for replacement, 2pcs 3x1mm for adjustment if you use large diameter wheels > 13mm
IMPORTANT: FALLER STEERING GUIDE AND SCREW ARE NOT PROVIDED.
THESE STEERING GUIDES ARE MADE FOR FALLER CAR SYSTEM STEERINGS and have to be used with faller screw.
It is compatible with Faller, Wiesmann, standard and Max Miniatures steerings.
IMPORTANT NOTES AND WARNINGS:
All our products are checked and tested before being put on sale. However, in the event of an exceptional defect, we invite you to contact us in order to find a repair or improvement solution and/or organize a return.
You have 15 days to withdraw and return the product.
We are at your disposal before and after purchase to advise you best in your production, do not hesitate to ask us questions and contact us in case of doubts.
DELIVERY :
FRANCE
Delivery is free for France by tracking letter
OR 6 euros by colissimo
EUROPE:
International tracked letter 6.90 euros
Or colissimo 13.50 euros
WORLD :
International tracked letter 12.5 euros
OR international colissimo 35 euros
Combined shipping provide ! If it is not working, if eBay asked you an immediate paiement, please contact us !
Very careful shipping.
Returns possible within 15 days.
WE WILL STUDY YOUR PERSONALIZED REQUESTS AND YOUR SUGGESTIONS, do not hesitate to contact us! :)
MANUFACTURING IS GENERALLY CARRIED OUT AT THE TIME OF ORDER.
Manufacturing and shipping time: 5 to 7 days (we will keep you informed in the event of exceptional additional delays)
Many customers have already trusted us, including the largest railway network in France (Mini World), with 100% satisfaction! :)
FR
Bienvenue sur notre boutique / atelier !
Fort de notre expérience de designer de produits, modeleurs 3D et prototypistes, nous proposons des solutions techniques et esthétiques pour modélistes, mondes miniatures et collectionneurs, en impression 3D.
PRESENTATION DE NOTRE PRODUIT:
Il est adapté aussi bien pour les circuits à bandes magnétiques que pour les circuits classiques à fil Faller ou corde à piano standard.
COMPATIBLE pour tout bus et camion à l'echelle HO ainsi qu'aux voitures à l'echelle 1/64.
N'est pas recommandé pour les voitures 1/87 car les aimants sont trop puissants et bloqueraient une voiture trop légère.
Si le patin est bien serré correctement, il ne touchera pas le sol, ce qui réduit l'usure de vos circuits, améliore l'autonomie de votre véhicule, réduit le bruit et évite les crash dus à des états de surface de route abimés.
Patin compact offrant la meilleure qualité de toucher de route et tenue de route possible : pas de sous virage, pas de crash !
Plus besoin de plier votre patin pour ajuster l'adherence, vous pouvez directement ajuster la hauteur de votre patin en faisant glisser l'aimant dans son orifice, ou en desserant un peu le patin. Vous pouvez aussi ajouter un des 4 magnets supplémentaires fournis si vous prévoyez d'utiliser des véhicules aux roues de diamètre supérieur à 13mm de diamètre.
Le PLA utilisé et la façon dont le patin est imprimé vous offre la meilleure resistance au choc et à l'usure possible. Il est impossible de casser le patin en deux, même en le pliant de force (sauf si vous le coupez à la pince coupante bien sûr).
Testé et adopté en condition intensive. Cette solution est parfaite pour un usage long (salons, expositions...) même sur des circuits imparfaits.
CONTENU: CE QUE VOUS RECEVEZ
1 pièce patin de guidage de direction imprimé en 3D et assemblé à la main, avec un magnet neodyme de 3x2mm
+ 4 extra magnet (2 pièces 3x2mm pour remplacement et 2 pièces 3x1mm pour ajustement en cas d'utilisation de roues de diamètre supérieur à 13mm
Compatible avec les directions HO 1/87 Faller, Wiesmann et Max.Miniatures (consultez notre boutique)
IMPORTANT : LES COMPOSANTS FALLER comme les directions et les vis NE SONT PAS FOURNIS
NOTES IMPORTANTES ET AVERTISSEMENTS:
CES PATINS NECESSITE D'INSTALLER LA DIRECTION FALLER EN POSITION INVERSEE (voyez les photos comme exemple), assurez vous d'avoir l'espace nécessaire dans votre véhicule miniature pour utiliser ces patins.
Tous nos produits sont vérifiés et testés avant mise en vente. Cependant, en cas de défaut exceptionnel, nous vous invitons à nous contacter afin de trouver une solution de réparation, d’amélioration et / ou organiser un retour.
Vous avez 15 jours pour vous rétracter et retourner le produit.
Nous sommes à votre disposition avant et après achat afin de vous conseiller au mieux dans vos fabrications, n’hésitez pas à nous poser des questions et nous contacter en cas de doutes.
LIVRAISON :
FRANCE
La livraison est gratuite pour la France en lettre suivie
OU 6 euros en colissimo
EUROPE:
Lettre suivie internationale 6,90 euros
Ou colissimo 13,50 euros
MONDE :
Lettre suivie internationale 12,5 euros
OU colissimo international 35 euros
Envoi très soigné.
Retours possibles sous 15 jours.
NOUS ETUDIONS VOS DEMANDES PERSONNALISEES ET VOS SUGGESTIONS, n’hésitez pas à nous contacter ! :)
LA FABRICATION EST GENERALEMENT REALISEE AU MOMENT DE LA COMMANDE.
Délai de fabrication et d’envoi: 5 à 7 jours (nous vous tiendrons informé en cas de délai supplémentaire exceptionnel)
De nombreux clients nous ont déjà fait confiance, notamment le plus grand réseau ferroviaire de France (Mini World), avec 100% de satisfaction ! :)