ALORAIR Stainless Steel Crawl Space Vent Fan, 540 CFM Air Out Ventilation Fan with Humidistat Dehumidistat, IP55 Rated Exhaust Fan with Isolation Mesh for Crawlspace Foundation Basements Garage Attic

About this item

• 👍【Product Details】 L x W x H 15" x 10.2" x 2.8" size, IP-55 Rated Fans, 5 Leaves AC Axial Fan, 540 CFM airflow, Air-out, Noise <55dB quiet enough, 10%-80% Humidity Regulating Button, Grounded Power Cord, Attached Mounting Screws. Always work efficiently without replacement.
• 👍【Stainless Steel】 Heavy-duty Stainless Steel Construction. Accelerated air circulation reduces moisture, aims to prevent condensation and wood rot. Balance the humidity, and improve the humid environment and indoor air quality to create a livable environment. √ The stainless steel shell with an IP-55 rating Axial Fan, highly resistant to liquids and dust, and higher weather-proof, makes it ideal for work in a humid environment with long service life, don't worry it rusts.
• 👍【Built-in Isolation Mesh & IP-55 Rated Axial Fan】√ Isolation Mesh on the back prevent particulates from gaining access to the crawl space; √ The stainless steel shell with an IP-55 rating Axial Fan, highly resistant to liquids and dust, higher weather-proof, makes it ideal for work in a humid environment with long service life, don't worry it rusts.
• 👍【Installation & Use 】 Measure the size of the crawl space vent before purchase. Install the fan for your crawl space, basement, attic, garage and other humid environments. When installed, Faceplate can be trimmed to match non-standard foundation openings. √ Just plug it in, set it and forget it.
• 👍【100% Satisfaction】Our crawlspace ventilation fan is fully compliant with the electrical safety ETL. Every AlorAir crawl space fan comes with a 2-year warranty with a professional customer support team ready to assist at any time. If you have any questions, you can call us directly, ready to assist you.
• IMPORTANT: All models are equipped with factory pre-installed thermostats to prevent fan operation when outdoor temperatures fall below 35°F.

Product Description

Why do we need crawl space ventilation fan?

Perennially confined crawl space lacks outside air circulation, causing moist air collect in the space. Prolonged moisture causes to grow and wood to rot, which affects the structural integrity of the wood. What's more, particulates in the air will enter your living space through floors and cracks and even crawl space HVACs, thus creating bad environment. It is bad for you and your family

ALORAIR underground ventilation system can easily solve for you, the crawling space fan simply discharges moist air from the confined space, so that fresh air from the outside can enter, more effectively removing excess heat, moisture, dust and odor in various spaces. Whether it's crawl space, basement, garage or carpentry workshop.

More Features

Isolation Mesh Add isolation mesh to prevent particulates from entering the machine to affect normal operation and stop particulates from crawling into your living space.	Built to Last The fan system uses a stainless steel mounting frame, which has high water resistance and protection.can cope with various weather conditions.	Physics Switch Dehumidistat Features knob control panel without complicated electronic interface, easy to set humidity for running, support 10%-80% RH control range.

IMPLEMENT YOUR BASIC REQUIREMENTS

Balance temperature and humidity

• Built-in dehumidistat: humidity in dry air,
• Antifreeze thermostat: when the outside temperature is too low, the exhaust fan stops running, extending the service life of the machine
• Memory function: When the humidity in the air is higher than the set value, the fan will start automatically. When the humidity falls below the set value, the fan will stop running
• Canned ball bearing motors: reduce energy consumption and noise levels
• Installation method: wall-mounted
• Working humidity range: 10~80%.
• Operating temperature range: 35-158°F
• Noise＜ 55 dB

INSTALLATION MATTERS: Crawlspace fans must be installed in electrical control boxes and motors facing inside the crawlspace.

1. Confirm that the doors and vent covers of the buildings around the installation are open.

2. In order to ensure the stable installation of the crawling space ventilator, it is necessary to mark four points on the wall to confirm the installation position.

3. Install the crawl space ventilation fan to the wall with 4 screws and observe the horizontal direction of the fan.

4. Note:

If the mounting surface is a base block or brick. Before the fan is installed, a 5/16-inch hole needs to be drilled with a masonry drill bit. Install wall anchors at the openings and secure them.

If installed on a mesh of wood aggregate, edge joists, or existing crawlspace vents, secure crawl space vents with screws, washers, and nuts at the four corners of the metal panel of the vent.

Crawlspace Ventilaton Fan Application

	VentirPro 540S Ventilation Fan	VentirPro 260S Ventilation Fan	VentirPro 720S Ventilation Fan
	See Details	See Details	See Details
Customer Reviews	4.4 out of 5 stars 40	—	4.6 out of 5 stars 32
Price	$62.38$62.38	—	$102.83$102.83
Functioning Humidity Range（%）	10~80%	10~80%	10~80%
Temperature Range	35- 158°F	35- 158°F	35- 158°F
Noise Level	55 dBA	40 dBA	55 dBA
Power(W）	45W	30W	68W
Airflow	540CFM	260CFM	720CFM
Power Cord(ft)	6 ft	6 ft	6 ft
Weight(lbs)	6.2 lbs	3.8lbs	8 lbs
Size For	15X10.2X2.8in	13.4X9.1X2.5in	16.X11.1X4.1in
ETL Certified	✓	✓	✓