Details

 

Carburetor

The high performer 750CFM manual choke carburetor is designed and calibrated for optimum marine performance or high power automotive engines.
It is an manual controlled throttle with 4-cylinder square bore carburetor flange, dual inlet with air valve assist. It can be used as a replacement for the high quality 750CFM carburetor.
 
Carburetor is precision cast to meet or exceed OEM specifications, precision CNC machined from high quality aluminum alloy, silver polished exterior, no blown power valves or broken plastic parts, hard wearing and durable, base bolt type is 3 / 4 x 2 inch.
 
The 750CFM carburetor is calibrated and engineered to maximize fuel efficiency and performance and is tested across the entire throttle range. The carburetor automatically proportions the appropriate concentration and outputs the appropriate amount of mixture according to the requirements of the different engine conditions, so that the mixture is well blended and provides power to start and run
 

Part Number

1407

 

Specification

Carburetor Barrels: 4-Barrel
CFM: 750 CFM
Fuel Type: Gasoline
Fuel Inlet Type: Single
Choke Type: Manual
Carburetor Flange Type: 4-Barrel Square Bore
Secondary Type: Air Valve
CFM Range: 700-799 CFM
Bolt Hole Pattern: 5.160" x 5.625"

 

Will Fit for Following Models

This 750 CFM 4 barrel carburetor is designed and calibrated for optimum street performance in small-block and big-block engines with Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines.

 

Professional installation is highly recommended.
Please check the part number and illustrations carefully to ensure that it fits your model. If you are not sure, please contact us and we will respond as soon as possible.


★Professional Seller★ ☑Quality Assurance☑ ✈︎Fast Shipping✈︎ ☺Efficient Service☺

 

-Please leave us your full name, your telephone number and detailed address when ordering.
-We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay the order.
-We try our best to pack the products as good and safe as possible ,so they always arrive in a good condition.

-We accept PayPal only.
-All major credit cards are accepted through secure payment processor PayPal.
-Payment must be received within 4 business days of auction closing.

-We offer sophisticated products at a high technological level, with the highest possible quality and the most favorable price.
-With these parts you can replace your defective parts simply plug and play.
-Our warranty is valid for max. 24 months without mileage limitation.
-Please compare carefully with Photos or OE number before purchasing the part.
-Once a problem occurs with the purchased product, please do not hesitate to let us know with Ebay messages,we will offer you refund or replacement.

Product View
Product Description

 

Carburetor

The high performer 750CFM manual choke carburetor is designed and calibrated for optimum marine performance or high power automotive engines.
It is an manual controlled throttle with 4-cylinder square bore carburetor flange, dual inlet with air valve assist. It can be used as a replacement for the high quality 750CFM carburetor.
 
Carburetor is precision cast to meet or exceed OEM specifications, precision CNC machined from high quality aluminum alloy, silver polished exterior, no blown power valves or broken plastic parts, hard wearing and durable, base bolt type is 3 / 4 x 2 inch.
 
The 750CFM carburetor is calibrated and engineered to maximize fuel efficiency and performance and is tested across the entire throttle range. The carburetor automatically proportions the appropriate concentration and outputs the appropriate amount of mixture according to the requirements of the different engine conditions, so that the mixture is well blended and provides power to start and run
 

Part Number

1407

 

Specification

Carburetor Barrels: 4-Barrel
CFM: 750 CFM
Fuel Type: Gasoline
Fuel Inlet Type: Single
Choke Type: Manual
Carburetor Flange Type: 4-Barrel Square Bore
Secondary Type: Air Valve
CFM Range: 700-799 CFM
Bolt Hole Pattern: 5.160" x 5.625"

 

Will Fit for Following Models

This 750 CFM 4 barrel carburetor is designed and calibrated for optimum street performance in small-block and big-block engines with Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines.

 

Professional installation is highly recommended.
Please check the part number and illustrations carefully to ensure that it fits your model. If you are not sure, please contact us and we will respond as soon as possible.


★Professional Seller★ ☑Quality Assurance☑ ✈︎Fast Shipping✈︎ ☺Efficient Service☺

 

Payment

-We accept PayPal only.
-All major credit cards are accepted through secure payment processor PayPal.
-Payment must be received within 4 business days of auction closing.

Shipping

-Please leave us your full name, your telephone number and detailed address when ordering.
-We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay the order.
-We try our best to pack the products as good and safe as possible ,so they always arrive in a good condition.

Returns

-We offer sophisticated products at a high technological level, with the highest possible quality and the most favorable price.
-With these parts you can replace your defective parts simply plug and play.
-Our warranty is valid for max. 24 months without mileage limitation.
-Please compare carefully with Photos or OE number before purchasing the part.
-Once a problem occurs with the purchased product, please do not hesitate to let us know with Ebay messages,we will offer you refund or replacement.

Feedback


On May 8, 2026 at 03:57:03 PDT, seller added the following information:

Datacaciques