Bracket Puller fits for SeaStar and Uflex support brackets, including older style Tournament brackets. HS5157 kit fits front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755.
【Steering Support Bracket Puller】
Helps safely remove support brackets and minimize damage to the steering bracket during removal process.
【HS5157 Seal Kit with Pin Wrench】
Used to repair leaking or weeping cylinder seals. It is a nice replacement hydraulic seal kit fits for Seastar pivot / front mount hydraulic steering cylinders on outboard motors. This kit also fits most outboard boats with single or twin engines.
【Superior Material】
The Bracket Puller is constructed of well-built and of high-quality forged steel with black oxide finish. The Seal Kits is made of high standard billet aluminum, both of them are able to resist rust and corrosion, ensures an unparalleled long lifespan.
Steering Hydraulic Support Bracket Puller
Application:
Fit for (MOST) SeaStar and Uflex support brackets, older style SeaStar Tournament brackets included.
Function:
Helps safely remove SeaStar and Uflex support brackets and minimize damage to the steering bracket during removal process.
Instruction:
Take haft(half) of the bolt out and insert the puller into the bracket
Screw the bolt to lock the bracket
Use a driver or socket to tighten the bolt, pressing the bracket out
Feature:
Teeth design fit to grip the bracket.
Applied with a 3/4" wrench or socket to fit the drive bolt.
4、5、6、7: Various O-rings for the different cylinders
Simple to Use:
1. Loosening the Seal Gland
Place the pin wrench (supplied in the seal kit) in the holes of a gland, and use a 5/8-inch box wrench on the nut on the port end of the piston rod.
Turn counterclockwise on the pin wrench with opposite pressure on the box wrench to loosen the seal gland.
2. Removing the Support Bracket
Use a 3/4-inch socket wrench to remove the nut and washer securing the support bracket to the support rod.
Do the same to the piston rod nut and washer. Use wrenches on the opposite ends to keep the rods from turning.
With hardware gone, pull off the support bracket.
3. Removing the Old Seal Gland
Finish unscrewing the old seal gland.
If you can't grip it well with your hand, use the pin wrench. Slide it off the piston rod.
4. Installing the New Seal Gland
Place the tapered guide tool from the kit on the end of the piston rod and lubricate it and the piston rod well with oil or grease.
Carefully slide the new seal gland over the guide and onto the piston rod until it reaches the cylinder.
Screw the seal gland into the cylinder, but don't tighten it yet.
Remove the guide tool. (it is not part of the final assembly, but you will need it for the other side.)
5. Reinstalling the Support Bracket
Reconnect the support bracket to the support rod and piston rod and replace the washers and nuts, tightening the nuts against the washers.
You may need to use wrenches on the opposite nuts to tighten sufficiently.
6. Tightening the New Seal Gland
Use the pin wrench to tighten the new seal gland while using a 5/8-inch box wrench on the end of the piston rod for counter torque.
Package Includes:
1 x steering support bracket puller 2 x new seals/caps (one for each end of cylinder body) 1 x spanner wrench tool needed to remove seal caps 1 x seal gland assembly guide tool All necessary o-rings
Payment
We accept Payoneer/Paypal/Google Pay/Visa/Master Card/Amex/Discover for Payment.
Delivery Details
1.Orders will be ship out within 1 business days after payment has cleared.
2.Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours.
3.All of the items are shipped from our Warehouse in USA,Ship via USPS or UPS.It usually takes about 2-5 business days to reach you.
Terms of Sales
1.Any defective items received can be replaced or refunded. Please contact us with the item number, eBay ID and defect description within 7 days after the date of package arrived.
2.Support 12 months' Warranty. All product will be tested in 100% before delivery. If the item is was damaged in transit, kindly please contact us for a replacement or refund (Excluding contrived damage or misuse).
About Us
We offers a wide range of accessories to enhance and upgrade both the look and function of your vehicle.We sincerely appreciate your decision to purchase our products, we always committed to providing the high-quality, safe automotive decorative products and the excellent ,professional and customer service
Please note that our product is an aftermarket product (non-OEM). The parts we offer in this listing are an O.E. alternative; they are not produced by O.E. Manufacturers. All names, numbers, symbols and descriptions are used for reference purposes only. If you mind, please do not place an order.
If you have any questions, please feel free to email our service specialists 24 Hours a Day, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.
