8 Channel Relay Module With RJ45 interface Product Description:

1. The product has a wide range of uses
2. Easy to use
3. Many applicable scenarios
4. Using the controller module and 8-channel relay, you can remotely control up to 8 devices on the local area network.
5. Network control via RJ45 telecommunication connection
 
Product instructions:
1: Default IP: 192.168.1.4 Port: 30000
Open the browser, enter in the address:
to enter the control interface
2. Board instructions:
 
Package List:
1x 8 ChannelsRelay module
1x Network module
 
 
16 Channel Relay Module With RJ45 interface Product Description:

1. The product has a wide range of uses
2. Easy to use
3. Many applicable scenarios
4. Using the controller module and 16-channel relay, you can remotely control up to 16 devices
5. Using the Ethernet controller board, you can enjoy the remote control of other devices
 
Instructions for use:
1: Default IP: 192.168.1.4 Port: 30000
Open the browser, enter in the address:  to enter the control interface
2: Relay control HTTP command:
Relay 1-8 Channel commands:
Relay 9-10 Channel commands:
3: Query relay status command:
 feedback the current IO status and feedback 16 ACSII corresponding relative IO; the highest bit is the first channel, and the lowest bit is 16 channels.
For example: return 1111000011110000, the switch status is Relay1~4 is ON, Relay5~8 is OFF, Relay9~12 is ON, Relay13~16 is OFF
4: Modify IP:
 change the IP and port number page; when changing the IP and port number, IP1 must not be 0, all IP1-IP4 cannot be greater than 255; port cannot be 0; the change can be successful.
5: Restore the factory:
Short press the reset switch, the LED will flash as a warning,
Press and hold the reset switch until the LED will be on for a long time. Release the button and the light will go out after a while, indicating that the factory settings are being restored. The factory IP is: 192.168.1.4 Port: 30000
 
Package List:
1x 16 Channel Relay module
1x Network module
 
  • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
  • Payment must be received in 5 business days of auction closing.
  • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.

Fill your shipping info

  • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
  • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
  • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

DataCaciques