Heavy Duty Zinc Metal Plasterboard Wall Anchors Self Drilling Driva Plugs
No pilot hole needed - drive directly with a screwdriver or low-speed driver bit.
Zinc alloy die-cast self-drilling plasterboard wall anchors (Driva), 14kg shear / 6kg tension safe working load.
Delivery
Free Returns
Control
Self-Drilling Design
Drives directly into plasterboard, drywall or aerated concrete without a pre-drilled pilot hole, dowel or special setting tool.
Zinc Alloy (Zamak) Die-Cast
Considerably higher load capacity and greater long-term durability than standard nylon or plastic wall plugs.
Wide 14.2mm Flange
Seats flush against the board face once driven home, spreading the load around the fixing point.
Compact 28mm Length, 6.2mm Diameter
Suited to standard 9.5-15.9mm plasterboard and gypsum board.
Safe Working Load 14kg Shear / 6kg Tension
In 12.5mm plasterboard, with an ultimate tested load of up to 45kg shear.
Pozidriv/Phillips Self-Drilling Thread
Drives home with an ordinary screwdriver or low-speed driver bit - no power drill or special tool required.
Takes a No.8 Sheet-Metal Screw
4.0-4.5mm shank diameter for the item being hung.
Technical Specification
| Anchor Material | Zinc Alloy Die-Cast (Zamak) |
| Anchor Diameter | 6.2mm (0.24in) |
| Anchor Length | 28mm (1.10in) |
| Flange Diameter | 14.2mm (0.56in) |
| Weight Per Anchor | 5g (0.18oz) |
| Recommended Screw | No.8 Sheet-Metal, 4.0-4.5mm Shank |
| Suitable Board Thickness | 9.5-15.9mm Plasterboard/Gypsum |
| Safe Working Load | 14kg Shear / 6kg Tension (12.5mm Board) |
| Ultimate Tested Load | Up to 45kg Shear |
| Drive Type | Pozidriv/Phillips, Self-Drilling |
