PAINTING KIT ONLY - BRAKES/CALIPERS ARE NOT INCLUDED!!!

With the Brake Caliper Lacquer you give your vehicle a very individual and sporty look. It permanently seals and preserves the surface and is chemical, corrosion and oil resistant. It has a long-lasting gloss and is easy to clean.
  • Heat Resistant.
  • Chemical, Corrosion And Oil Resistant.
Application
  • Remove wheels.
  • Clean the brake caliper using the included steel brush and the included Brake Cleaner.
  • Mask off all the parts except the brake caliper.
  • Mix the brake caliper paint and the hardening agent with the spatula.
  • Apply the brake caliper paint with the paintbrush.
  • After painting the brake calipers let them dry, then put the wheel back in place, done.
For further instructions read the application sheet!

Due to the lighting conditions in product photography and different screen settings, the color of the product may not be reproduced authentically.

How many brake calipers can I paint with one Brake Caliper Lacquer set?
⇒ One set should be enough for four brake calipers or two brake calipers and two brake drums. Additional kit may be required depending on number of coats needed per caliper.

How should I prepare the brake calipers for the painting?
⇒ Remove loose dirt particles or rust with a steel brush and degrease the brake calipers with the enclosed brake caliper cleaner.

When is the painting dried?
⇒ After 2 hours the lacquer will be hardened enough to install your wheels again. The lacquer will be completely hardened approximately after five days.

Can I repaint the brake calipers?
⇒ Yes, of course! Scrape off the old paint, to get the best adhesion.

How robust is the lacquer?
⇒ The paint can take any mechanic, thermic and chemical strain of a serial braking system in the usual street traffic.

Product Features
  • Chemical, corrosion and oil resistant offering durability.
  • Long-lasting glossy shine.
  • Easy to clean by wiping over.
  • Easy and precise application.
  • No need to dismantle car parts.
  • Sufficient amount for 4 calipers and brand new in original packaging.
  • Included in the pack: 150g tin of paint lacquer, 400ml spray cleaner, 50g tin of hardener and instructions.
  • Heat resistant up to 300 degree C.
The colour in the image is for illustration purposes only. The actual colour of the paint may differ depending on application method or when dried.