THE KIT ALSO DESIGNED AND ADAPTED ESPECIALLY
FOR HARSH ENVIRONMENT UNDER THE HOOD OF THE CARS.
NEVER NEEDED ANY MAPPING ECU OR ANOTHER DEVICE TO BE INSTALLED.
One ACTIVE water electrolysis tank, with 13 plates measuring
3’’ X 8’’ inches (7.5 X 20.5 cm) made of pure polypropylene (PP)
with an upper safety valve 410 mBar (6PSI).
On the bottom, there are two external bakelite screwed connectors
for an easy connection with the CCPWM included wiring.
Also comes with one mounting heavy-duty holder with
connected one rotatable perforated metal bracket with screws
and nuts for mounting the bubbler- generator tank by the car parts.
(Made in California, USA)
2) WIRING, CABLES AND CCPWM DEVICE.
(3 Feet ) 1 meter, Low noise cable in red and black with dual circuit fuse
tap adapter and glued for ground usage connector, ready for an easy installation
in minutes, to supply the CCPWM from car fuse box directly with 12 - 24 VDC
( NO RELAY NEEDED )
(3 Feet) 1-meter cable ready for connection from CCPWM with the cell.
Special (SET IT AND FORGET IT) CCPWM short circuit output protection.
Over voltage protection, over current protection and linear potentiometer
for HHO production adjustments with stability and accuracy.
Fully sealed box, also included external sticker holder for supporting,
usually over car battery.
3) HOSES.
( 3 feet ) or 1 meter in length, silicone hose 10mm external diameter.
The only material that guarantees 25 years of hard usage.
(Made in Germany).
4) ONE FILTER.
One replaceable in black or gray metal, one-way directional,
free flow, hydrophobic, 5 microns pore diaphragm dust filter.
(Made in Italy)
Dimensions: 5 '' x 2,5 '' inches or 12.5cm length X 6.2cm
(upper side diameter) and 8mm ( 1 / 4" ) input - output fittings.
To be replaced, once every two years or every 25.000 miles.
5) One Special venturi tube with 5 holes (PP) 15cm x 8mm
for the air filter box.
6) One Jar KOH Potassium Hydroxide in flakes, high purity.
(Made in Germany)
NOT FREEZING IN WINTER UP TO - 15°C, CELSIUS. ENOUGH FOR 3 YEARS USAGE. IN THE MEANTIME REFILLING NEEDED, WITH DISTILLED WATER ONLY. |
CW-45 kit highly recommended for an easy installation, when there are limitations
and issues under the hood of the car for other kits, to be installed.
It is a usual phenomenon in most modern cars, with near to zero space.
The installation will be made completely, ten minutes after, without need,
any special tools or knowledge, because this Pure HHO kit sent
pre-wired and completely assembled, except hoses and filter.
.
The only needed, to follow three simple for installation steps.
DOWNLOADABLE INSTALLATION OWNERS MANUAL IN ENGLISH ONLY TO YOUR EMAIL AFTER BUYING.
Please before buy, let us know via eBay, your car's/vehicle specifications,
1. Brand Name. 2. Model and version. 3.Type of fuel. 4. Year of manufacture.
5. Horsepower. 6. Fuel Consumption combined in daily practice
or in town and on Motorway separately.
7. Mileage annually, Mileage in Total or After Engine Overhaul
8. Transmission Gear Box ( Automatic or manual )
9. If there is installed another fuel economy kit or any ECU mapping, chip
with complete details by the results before and after installation.
10. Car battery Voltage 12 or 24 Volt.
No orders and payments accepted before informing us, of the
aforementioned information one by one, because maybe
your car will need something else.
All information needed for checking your vehicle compatibility by the kit.
NOTE: THE HIGH POWER VEHICLES USING AS MAIN FUEL LPG
NEEDED LESS PURE HHO QUANTITY THAN PETROL OR DIESEL.
FOR THIS REASON ON LPG CARS THE KIT WILL BE SUITABLE
FOR V6 AND V8 POWERFUL ENGINES.
FAQ's