ISDT UC2 USB 1s 3.7v JR, 2s 7.4V JST-XH Smart LiPo Battery Balance Charger 800mA

ISDT UC2 USB 1s 3.7v JR, 2s 7.4V JST-XH Smart LiPo Battery Balance Charger 800mA USB Pocket LiPo charger from ISDT, an established manufacturer of chargers and electronics with a reputation for high quality design and components.This charger will charge any 1s LiPo battery equipped with a 2 pin JR (red) connector, or any 2s LiPo with a jst-xh balance lead (the most common type found on most LiPo batteries). It can be powered from any USB power source, and requires a standard USB C charging cable (not included).It has basic safety protection and will not charge a pack that is under or over voltage.-Red LED indicates charging.-Green LED indicates charging complete.Charge rate is up to 800mA/0.8A.Typical charge times (approx):-1000mAh 2s: 1 hour 15 minutes.-2200mAh 2s: 2 hours 45 minutes.-5000mAh 2s: 6 hours.Important: If leaving a battery on charge unattended it must be in a fire safe location (A LiPo bag only provides a few minutes of protection). This charger is for Lithium Polymer batteries (LiPo) only. USB Pocket LiPo charger from ISDT, an established manufacturer of chargers and electronics with a reputation for high quality design and components.This charger will charge any 1s LiPo battery equipped with a 2 pin JR (red) connector, or any 2s LiPo with a jst-xh balance lead (the most common type found on most LiPo batteries). It can be powered from any USB power source, and requires a standard USB C charging cable (not included).It has basic safety protection and will not charge a pack that is under or over voltage.-Red LED indicates charging.-Green LED indicates charging complete.Charge rate is up to 800mA/0.8A.Typical charge times (approx):-1000mAh 2s: 1 hour 15 minutes.-2200mAh 2s: 2 hours 45 minutes.-5000mAh 2s: 6 hours.Important: If leaving a battery on charge unattended it must be in a fire safe location (A LiPo bag only provides a few minutes of protection). This charger is for Lithium Polymer batteries (LiPo) only.eBay integration by

ISDT UC2 USB 1s 3.7v JR, 2s 7.4V JST-XH Smart LiPo Battery Balance Charger 800mA

USB Pocket LiPo charger from ISDT, an established manufacturer of chargers and electronics with a reputation for high quality design and components.This charger will charge any 1s LiPo battery equipped with a 2 pin JR (red) connector, or any 2s LiPo with a jst-xh balance lead (the most common type found on most LiPo batteries). It can be powered from any USB power source, and requires a standard USB C charging cable (not included).It has basic safety protection and will not charge a pack that is under or over voltage.-Red LED indicates charging.-Green LED indicates charging complete.Charge rate is up to 800mA/0.8A.Typical charge times (approx):-1000mAh 2s: 1 hour 15 minutes.-2200mAh 2s: 2 hours 45 minutes.-5000mAh 2s: 6 hours.Important: If leaving a battery on charge unattended it must be in a fire safe location (A LiPo bag only provides a few minutes of protection). This charger is for Lithium Polymer batteries (LiPo) only.
USB powered micro pocket LiPo charger from ISDT with a charge rate of 0.8A. 

Charge any 1s LiPo battery equipped with a 2 pin JR (red) connector, or any 2s LiPo with a jst-xh balance lead (the most common type found on most LiPo batteries).
It can be powered from any USB power source, and requires a standard USB C charging cable (not included). 

It has basic safety protection and will not charge a pack that is under or over voltage. 
Note: Batteries under 800mAh must support a charge rate up to 2C. Batteries under 400mAh must support 5C.

  • Red LED: The battery is currently charging.
  • Green LED: The battery is fully charged


Charge rate is 0.8A.
Typical charge times (approx):
-500mAh: 45 minutes
-1000mAh 2s: 1 hour 20 minutes.
-2200mAh 2s: 2 hour 45 minutes.


Important: If leaving a battery on charge unattended it must be in a fire safe location (A LiPo bag only provides a few minutes of protection). This charger is for Lithium Polymer batteries (LiPo) only.