Motul 8100 Power 5W40 Fully Synthetic Engine Oil 10L ESTER Technology 111809
High Performance engine oil - Gasoline & Diesel
100% Synthetic - ESTER
TYPE OF USE
High Performance 100% Synthetic - ESTER engine oil inspired from the competition and specially designed for Gasoline or Diesel engines, tuned or high performance, naturally aspirated or turbocharged, indirect or direct injection, and operating over a wide range of engine revs and temperatures, in the most severe road or racing conditions. Suitable for Gasoline and Diesel engines requiring an API SP viscosity grade 5W-40 lubricant. The exclusive formula of MOTUL 8100 POWER 5W-40 is compatible with biofuels (especially the Ethanol E85) and aftertreatment systems. It also protects downsized engines from the risk of LSPI (Low Speed Pre-Ignition), and its optimized high viscosity grade brings the maximum reliability to your engine and high protection against fuel dilution. Very good compatibility with catalytic converters. Suitable for all types of Gasoline fuels, leaded or unleaded, Ethanol, LPG, Diesels and biofuels. This type of oil may be unsuitable for use in some engines. Before use always refer to the owners manual.
PERFORMANCES
STANDARDS API PERFORMANCE SP
ESTER Technology: 100% Synthetic formula derived from competition and based on Ester ensuring outstanding oil film resistance at very high temperatures for maximum engine power and torque, as well as maximum wear protection. Stable oil pressure whatever the conditions of use, road or racing.
Turbocharged gasoline engines with direct injection have a certain risk of sporadic pre-ignition phenomena in the combustion chambers. This type of sporadic abnormal combustion resembles metallic noise from combustion chambers and is sometimes associated with a short power loss. This phenomenon called LSPI for Low Speed Pre-Ignition, or also Rumble, generates very high pressure peaks in the combustion chamber that can lead to piston damages and ultimately to engine destruction.
For their latest-generation downsized gasoline engines, which are equipped with direct injection systems and turbochargers, API has developed the API SP standard for engine lubricants in order to guarantee the perfect integrity of these
gasoline engines facing the risk of these abnormal combustions.
The API SP standard is fully backward compatible over API SN requirements and all former API standards. API SP lubricants provide outstanding oxidation resistance, better anti-deposits protection, better engine cleanliness, anti-wear protection and enhanced performance at cold temperature for Fuel Economy savings during the whole oil life span. Besides being backward compatible, compare to API SN and API SN Plus, the API SP standard provides higher performance and especially adds more protection against LSPI phenomenon for downsized direct injection turbocharged gasoline engines.
MOTUL 8100 POWER 5W-40 meets all these very highly demanding requirements of performance and durability, including in particular for API SP standard, the full compatibility to biofuels use such as LPG (Liquefied Petroleum Gas), CNG (Compressed Natural Gas), and Bioethanol (as available at the station), when using Ethanol Biofuel at a mix ratio of up to 85% (Bioethanol E85).
MOTUL 8100 POWER 5W-40 is particularly resistant to high temperatures to allow better control of oil consumption and provide higher wear protection. Its optimized viscosity grade SAE 5W-40 allows faster oil flow at start up, faster oil pressure build-up and brings the best compromise between power and reliability to your engine.
RECOMMENDATIONS
Drain interval: according to manufacturers recommendations and to be tuned to your own use.
MOTUL 8100 POWER 5W-40 can be mixed with synthetic or mineral oils.
Before use always refer to the owner manual of the vehicle.
PROPERTIES
Viscosity grade SAE J 300 5W-40
Density at 20°C (68°F) ASTM D1298 0.845
Viscosity at 40°C (104°F) ASTM D445 87.1 mm²/s
Viscosity at 100°C (212°F) ASTM D445 14.7 mm²/s
HTHS viscosity at 150°C (302°F) ASTM D4741 3.9 mPa.s
Viscosity Index ASTM D2270 177.0
Pour point ASTM D97 -48.0 °C / -54.0 °F
Sulfated Ash ASTM D874 0.79 % weight
TBN ASTM D2896 7.9 mg KOH/g
Flash point ASTM D92 236.0 °C / 457.0 °F
About Us
Our aim at World of Lubricant is to provide you with the best possible customer service and value for money.We are approved distributors of LIQUI MOLY brand. This guarantees you that your item is brand new and 100% genuine.If your preferred item is out of stock you can get in touch with us and we will do our best to order it especially for you.
Payments
We currently accept PayPal payment.Once full payment is receive your goods will be dispatched. If there is any issue with payment please contact us through eBay messages.
Shipping
We offer FREE shipping on all UK Mainland orders!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it three or four days after dispatch.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Please be aware that is courier was attemted to deliver parcel 3 times after it come back to us. In this Case £6 handling fee will be applied and deducted from total refund amount
International Shipping
ANY ORDERS THAT ARE SHIPPED OUTSIDE UK AND TOTAL INVOICE PRICE OVER £120 MAY ATTRACT IMPORT DUTY CHARGES AND THOSE HAVE TO BE PAID BY A CUSTOMER.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.The buyer is responsible for return postage costs.You can return a product for up to 30 days from the date you purchased it.Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Feedback
Positive feedback is very important to us and we will always strive to provide 100% customer satisfaction in order to achieve this.Once you have received your item and are happy with the purchase could you please leave a positive feedback and a 5 star DSR.Should for any reason a problem arise, please do not leave a negative / neutral feedback or open a return request please contact us immediately so we are given the chance to rectify the issue amicably.We will provide you with a positive feedback once we have received payment confirmation.The DSR rating 1 to 3 star is equal to negative feedback please always leave a 5 star if we deserve it thanks in advance.
