Cylinder Bore Engine Hone - Silicon Carbide - 240 Grit; 89mm
DDS Engineering® Silicon Carbide (Carborundum) Cylinder Bore Hones are the perfect choice for engine rebuilding, engine reconditioning and other cylinder honing applications.
This hone is suitable for typical engines.
Ball Brush Tools are designed to:
- remove cylinder glaze
- create a new crosshatch
- hone cylinders to ensure they are ready to accept new pistons/rings.
Specifications
- Material: Silicon Carbide
- Grit: 240
- Diameter: 89mm
Picking the right size and grit
- For Large Bore Sizes - Larger than 90mm+: Pick a Hone ¼" / 3-6mm larger than the measured size of your cylinder bore.
- For Medium Bore Sizes - 60mm to 90mm: Pick a Hone 2-4mm larger than the measured size of your cylinder bore.
- For Small Bore Sizes - Less than 60mm: Pick a Hone 1-3mm larger than the measured size of your cylinder bore.
Both 105mm & 108mm hones are suitable for typical V8 engines with 4" cylinder bores.
240 Grit is suitable for most typical applications / classic / old school engines.
320 Grit is suitable for most modern engine applications where a finer finish is required.
Always pick a hone larger than the bore size - i.e. do not pick a 80mm hone for a 80mm bore, choose 83mm.
Note: Please refer to your engine & ring manufacturer to ensure a perfect pick.
Important Notes (!)
- These tools are intended for professional use and must be used with honing oil / suitable lubricant.
- After honing it is critical to clean the cylinder thoroughly with solvent, soap & water and wipe with ATF to check for any grit that may remain embedded in the freshly honed surface.
Shipping: FREE Regular Postage
- Australia Wide
- New Zealand (NZ)
All our stock is in SYDNEY - shipped by AUSTRALIA POST!
We are a 100% Australian owned, GST registered and independent company.
Shop with us to support a local Aussie supplier!
All shipments are via Australia Post - No couriers. PO Box delivery guaranteed!
Same Day Shipping means Same Day Dispatch - not just same day tracking number!
We offer full customer service - please ask us about any of our products if you require assistance with selection or application.