eBay

46 piece Hydraulic Hose Emergency Repair Kit for JCB Kubota and Yanmar Construction Equipment
Skid Steer, Track Loaders, and Excavators.

Just about everything you will need (except Hydraulic Oil) to get you back up and running when a callout is too costly, many hours or many miles away and you just need to get the job done and be on your way home or on to the next Job.

If you are fairly handy on the tools this comprehensive DIY Breakdown Repair Kit will save you
time and money, because it will allow you to repair most of the common failures
you will encounter during your day-to-day earthmoving operations.

This Kit may just pay for itself within one or two service callouts.

We have put this kit together based on nearly two decades of experience providing breakdown and callout services to all types of JCB Kubota and Yanmar Earthmoving and Construction Machinery and the attachments they use.

This Hydraulic Hose Emergency Repair Kit is also Compatible for use with

JCB Equipment

Backhoe Loaders 1CX, 3CX, 5CX
Skid Steer Loaders 135, 155, 190, 210, 215, 250, 270, 330.

Kubota Equipment

Excavators, K008, U10, KX018, U17, U25, U27, KX033, U35, KX040, U48, U55, KX057.
Tractors, B01, B26B, B50, L Series, L40, MX5200, M6040, M7040, and
Agricultural Attachments, Compact Discs, Mulchers, Power Harrows, and Tine Cultivators.

Yanmar Machinery.
SV08, VIO 12 ,17, 20, 23, 25, 30, 35, 50,VIO 55

This Comprehensive Kit Will allow you to

Disconnect and Plug or Cap the open Ports, on Pumps, Cylinders, Attachments, Hoses & Pipes.
Remove and replace a hose end or,
Make a completely new hose assembly or,
Cut out a damaged or pinched section and join it back together or,
Replace a Leaking or Damaged Quick Connect Coupler
All for a fraction of the price of an expensive callout
and most important of all
Get you quickly back to work so that you can charge out your operating hours.

Types of Hoses Assemblies this Kit will allow you to Make and install

Tilt Bucket and Tilt and Hitch Hoses (excavators)
4 in 1 Bucket Hoses (Loaders Internal on the Bucket and also from the Machine to the Bucket)
Bucket Tilt Hoses (Loaders and excavators)
Auxiliary Supply and Return Hoses for Augers, Brooms, Rock Breakers, and Trenchers (Loaders and Excavators).
Dipper Arm Hoses (excavators)
Boom Lift Hoses (loaders and excavators)
Pump to Valve Hoses (excavators)
Drive Hoses (Loaders and Excavators)

These quality field fit reusable hosetails are supplied by an Australian owned hydraulic fittings manufacturer.

These are ideal for on site use, where no hose crimper is available.
The Reusable Hose tails are precision machined from Solid Steel Bar stock to be very robust,
The Adaptors are made from Drop Forged Steel,
and the Dry Break Flate Face Couplings are made from Case Hardened Steel.

High Pressure Two Wire Hydraulic Hose
Manufactured to Meet or Exceed SAE 100R2AT
This Kit also comes with Economic Quantities of Matched High Pressure Two Wire Hydraulic Hose
Manufactured By Gates, ENGMATTEC.

All Fittings and Hoses are Easy to Assemble, Use, & Fit with only a couple of spanners (with or without a vice) out in the field with no need for a crimping machine.

Hydraulic Hose (total of 12 Meters)

4 meters 100R2 1/4 inch 5800 psi (400 bar) Two Wire Hydraulic Hose
4 meters 100R2 3/8 inch 4800 psi (330 bar) Two Wire Hydraulic Hose
4 meters 100R2 1/2 inch 4000 psi (275 bar) Two Wire Hydraulic Hose

Hose Wrap for Extra Protection (total of 12 meters)
(made from HDPE, High-Density Polyethylene)
Hose Wrap Provides Extra protection from Rubbing, Abrasion, and UV Light.

4 meters R16SSG HDPE Hose Wrap for 1/4 inch Two Wire Hydraulic Hose
4 meters R20SSG HDPE Hose Wrap for 3/8 inch Two Wire Hydraulic Hose
4 meters R25SSG HDPE Hose Wrap for 1/2 inch Two Wire Hydraulic Hose
All the Hydraulic Hoses and Wrap are coiled and packed in a Strong Woven Nylon Bag

Reusable Hose Fittings (12 Sets)

4 x 1/4" Hose x 1/4 BSP Female
3 x 3/8" Hose x 3/8 BSP Female,
1 x 3/8" Hose x 3/8 BSP Male,
4 x 1/2" Hose x 1/2 BSP Female,

Adaptors, Plugs and Caps (22 Pieces)
2 x 1/4 x 1/4 BSPP Male / Male Nipples
2 x 3/8 x 3/8 BSPP Male / Male Nipples
2 x 3/8 x 1/2 BSPP Male / Male Nipples (for Flat Face Couplers)
2 x 1/2 x 1/2 BSPP Male / Male Nipples (for Flat Face Couplers)
2 x 1/2 x 1/2 Male / Male BSPP 90 Elbow
2 x 1/4 x 1/4 BSP Male Female 90 Elbow
2 x 3/8 x 3/8 BSP Male Female 90 Elbow
2 x 1/2 x 1/2 BSP Male Female 90 Elbow
2 x Sets of 1/4 BSPP Plugs and Caps (
2 x Sets of 3/8 BSPP Plugs and Caps
2 x Sets of 1/2 BSP Plugs and Caps

PLEASE NOTE 5/8" REUSABLE FITTINGS AND HOSE
FOR SOME JCB MODELS IS NOT INCLUDED

Couplings (Quick Connect) (1 Set = 4 pc )

1 x Pair 1/2 inch Flat Face Dry Break Quick Connect Couplers with Dust Caps

All Hose fittings adaptors and Couplers are neatly Packed in a Strong Plastic Organiser Case.

Buy with confidence from a long-established Australian-owned and based company with our 12-month warranty and tax invoice.

Please click the link below to see more fittings available

https://www.ebay.com.au/sch/i.html?_dmd=2&_dkr=1&iconV2Request=true&_ssn=hydraulic.online&store_name=hydrauliconline&_oac=1&store_cat=5889905015

Improper Selection, Installation, Implementation, And/Or Operation By Anyone Other Than Persons With Appropriate Technical And Mechanical Training Can Result In Damage To Equipment Or Property, Serious Personal Injury, Or Death. Proper Precautions And Safety Procedures Should Be Implemented Prior To The Installation And Operation Of Equipment.

Please be aware that extra duties and import taxes may apply to addresses outside of Australia. If there is any additional documentation that must be included for export to your location please advise when an placing order. We are not accountable for paying any additional fees relating to import and it is the responsibility of the Buyer to ensure all the correct documentation is supplied as necessary.