W2 Stainless Steel Worm Drive Hose Clamps DIN 3017 Pipe Clips 8-210mm

W2-grade stainless steel worm drive hose clamps to DIN 3017, 8-210mm clamping range. Fine, even adjustment with rolled edges to protect hose walls.

✅ Suitable for: Automotive, plumbing, garden hose and general pipe fixing (8-210mm)

Fast UK
Delivery

60-Day
Free Returns

Strict Quality
Control

The recognised European standard for worm drive hose clamps.

Stainless steel (AISI 430) band and housing for strong resistance to rust and general corrosion.

Zinc-plated carbon steel screw, which holds torque more reliably under repeated tightening.

Fine, even adjustment right across the clamping range.

Reduce the risk of the band cutting into softer hose walls.

9mm (0.35in) wide, 0.7mm (0.03in) thick band, keeping the clamp low-profile.

Approx. 35 lbf-in, to guide correct fitting.

Clamping-diameter sizes from 8-12mm (0.31-0.47in) up to 190-210mm (7.48-8.27in).

Technical Specification

Material	W2 (AISI 430) Stainless Steel Band, Zinc-Plated Screw
Standard	DIN 3017
Drive	Worm Drive
Band Width/Thickness	9mm / 0.7mm
Recommended Torque	4.0 Nm (approx. 35 lbf-in)
Clamping Range 1	8-12mm (0.31-0.47in)
Clamping Range 2	10-16mm (0.39-0.63in)
Clamping Range 3	12-22mm (0.47-0.87in)
Clamping Range 4	16-25mm (0.63-0.98in)
Clamping Range 5	20-32mm (0.79-1.26in)
Clamping Range 6	25-40mm (0.98-1.57in)
Clamping Range 7	30-45mm (1.18-1.77in)
Clamping Range 8	40-60mm (1.57-2.36in)
Clamping Range 9	50-70mm (1.97-2.76in)
Clamping Range 10	60-80mm (2.36-3.15in)
Clamping Range 11	70-90mm (2.76-3.54in)
Clamping Range 12	90-110mm (3.54-4.33in)
Clamping Range 13	100-120mm (3.94-4.72in)
Clamping Range 14	110-130mm (4.33-5.12in)
Clamping Range 15	120-140mm (4.72-5.51in)
Clamping Range 16	140-160mm (5.51-6.30in)
Clamping Range 17	170-190mm (6.69-7.48in)
Clamping Range 18	190-210mm (7.48-8.27in)