Shelly Duo GU10 - WiFi Cool White / Warm White Bulb

Shelly Duo GU10 - WiFi Cool White / Warm White Bulb Wi-Fi operated Bulb Set the light to suit your mood. With the dimmer slider, you can adjust the brightness of the Shelly Duo bulb. Shelly Duo welcomes you at home and lets you control your lights from your bedroom to your backyard. It even makes it seem like you’re home when you’re not. It’s all about simplifying your life with the smartest WiFi dual white bulb in the world. KEY FEATURES Embedded webserver Can function as a standalone device, as an accessory to a home automation controller, or it may be uséd as another automation system's component Designed for installation in a standard light socket – E26 Two light modes – Cold White and Warm White SPECIFICATIONS Power Power Rating 4.8W Socket GU10 Power supply AC 110-230V ±10%, 50/60Hz Power supply DC No Special functions Device temperature protection No Overload protection No Power measurement No Dimming Yes Features Beam angle 36° Brightness Warm White: 475 LM Color changing No Color Temperature 2700K - 6500K Filament LED Glass/Coating Matte Predefined effects No Protection Class IP20 Operational temperature -10ºC to +40ºC Device power consumption < 1 W Intelligent On/Off Yes Local and remote control Yes Sunrise/Sunset Yes Weekly Schedule Yes Lifetime 30,000 hours Connectivity Wireless/WiFi Protocol 802.11 b/g/n Radio frequency 2400 - 2484 MHz Radio signal power 1mW Range up to 50 m outdoors and up to 30 m indoors (depending on the building materials) Dimensions Size 50mm x 73mm   Standard warranty (included in purchase price): 24-month manufacturer warranty due to device malfunctions when it is uséd in user manual described conditions. NOTES Simply turn the bulb on and off 5 times. If you do not have a switch connected, then you will need to move the bulb to a location that does or use an alternative method to switch the power to the bulb on and off again. Be sure to wait 2-3 seconds before powering the device back up. When the Shelly lightbulb starts to flash, it will return to AP mode meaning the it has completed the Reset procedure. On occasion, if the device did not start the reset procedure, you may be required to try again.