DINITROL 410NF BLACK BODY KIT SPOILER FIXING ADHESIVE GLUE CAR BODY REPAIR 300ml
Item Description
DINITROL 410 UV NF is a 1-component polyurethane sealing and bonding compound with good resistance and UV stability. The sealer is quick-drying and elastic, and can be coated with most lacquers. Areas of application DINITROL 410 UV NF is used for bonding and sealing in a range of industrial areas, such as bus, trucks and caravan construction and shipbuilding. The material adheres well to primed and lacquered metals, duroplastics (glass fibre reinforced plastics, hard PVC), wood and glass. It is suitable for sealing overlapping and expansion joints in visible interior and exterior areas in commercial vehicle construction. We recommend carrying out an adhesion test before applying to complex substrates. Special primers/Adhesion promoters ? Plastic primer ? Zinc or aluminium primer ? Wood primer ? Glass primer Method of use DINITROL 410 UV NF is used at room temperature. The surface to be treated must be clean and free from dust, oil and grease. To clean contaminated substrates please use DINITROL 582. For cartridges and tubular bags, standard supply guns can be used. Dimension and thickness of the adhesive beat depend on the max. stress due to the move inside the bonded joint. The curing of the DINITROL 410 UV NF depends on the dimension of the joint, air humidity and temperature. Lacquer coating 2-C acrylic paints, elastic paints (latex paints, watersoluble acrylic paints). Water-soluble paints should be tested for suitability beforehand. Alcohol-based paints or alkyd resin paints impair hardening and may only be used on completely hardened sealing compound. In order to prevent the formation of blisters at higher temperatures, make sure the sealer is completely hardened. Expansion joints must only be coated with elastic paints. Concerning nitro cellulose paints, a suitability test must be carried out prior to application. Technical Data Black, RAL on request Raw material base Polyurethane, pre-polymer, dries by air humidity Consistency paste Flow (2.6 mm/ 2.8 bar 20°C) 40 ? 60 g/min cartridge Density (20°C) ~ 1.2 g/ml Processing temperature + 5 °C to + 35 °C Temperature resistance ? 40 °C to + 90 °C (short-term to 120 °C) Resistance (cured) long-term: water, salt water, diluted acids and alkalis, aqueous cleaner short-term: petrol, grease and mineral oil Cleaning Non-hardened material: Petroleum spirit Hardened material: Can only be removed mechanically. Skin formation time ~ 30 min at 23 °C / 50 % RT Surface drying ~ 2.5 h (tack free) Hardening speed ~ 3 mm per 24 h at 23 °C / 50 % r.h. Shore A hardness (DIN 53505) > 45 Tensile strength (DIN 53504) 1,4 N / mm² Tear propagation resistance (DIN 53504) ~ 8 N mm Elongation at break (DIN 53504) 400 % Modulus of elasticity (DIN 53504) 100% ~ 1.0 N/mm² after 24 h Storage time Between 15°C and 25°C 12 months Note: Seal opened packages immediately after use

About Us


Our aim at World of Lubricant is to provide you with the best possible customer service and value for money.

We are approved distributors of  LIQUI MOLY brand. This guarantees you that your item is brand new and 100% genuine.

If your preferred item is out of stock you can get in touch with us and we will do our best to order it especially for you.

Payments

We currently accept PayPal payment.

Once full payment is receive your goods will be dispatched. If there is any issue with payment please contact us through eBay messages.

Shipping

We offer FREE shipping on all orders!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it three or four days after dispatch.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Please be aware that is courier was attemted to deliver parcel 3 times after it come back to us. In this Case £6 handling fee will be applied and deducted from total refund amount

Returns

If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.

The buyer is responsible for return postage costs.
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.

Feedback

Positive feedback is very important to us and we will always strive to provide 100% customer satisfaction in order to achieve this. 
Once you have received your item and are happy with the purchase could you please leave a positive feedback and a 5 star DSR.

Should for any reason a problem arise, please do not leave a negative / neutral feedback or open a return request please contact us immediately so we are given the chance to rectify the issue amicably. 

We will provide you with a positive feedback once we have received payment confirmation.  

The DSR rating 1 to 3 star is equal to negative feedback please always leave a 5 star if we deserve it thanks in advance.
Add to Favourite Sellers Sign up to Newsletter View Feedback Contact Seller Visit seller's eBay Shop About Seller Page
Powered by Frooition
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.