2. Installation

2.1 To use HDMI cable to connect the HD source with the HDMI input port of device.

2.2 To use HDMI cable to connect the HDMI output port of device with the display.

2.3 To use the USB TO DC 3.5mm power cable to connect the DC5V Port of the device with USB Power source like TV or USB Power Docking.

2.4 Connect IR Receiver cable to the IR jack

2.5 Then press again the “Switch” button at device or press the button at remote to operate the device.

3. Matters needing attention:

3.1 Function description of "Auto switch”

The Switch can support input channel Auto Switch function, it can auto jump to the input channel port that just have HDMI Cable connected(means have new Signal Source connected); it can also auto jump to other input channel port that have signal input if the current channel signal source out. To press the "A" button at remote or press the "Select" 

button for lasting five seconds, it can turn on or turn off the auto switch function. When

the input channel led light flash for one time, the auto switch is turned on; when the 

input channel led light flash for three times, the auto switch function is closed.

3.2 If the signal resolution is 8K@60Hz or 4K@120 Hz, please use HDMI2.1 standard cables, and the cable should be as short as possible.

3.3 The product has power off memory function. The setting state of the output channel is

Recorded and saved. After the power is off, the saved data will be automatically retrieved for configuration.

Spec: