Descriptions:
NEW Dental A-BLADE Ⅱ Gutta Percha /Tooth gum Cutter with 4 tips
Feature：
1. Design ingenious , Shape beautiful , Conform to the human body engineering
2. Wireless mode , Operation ,flexible, convenient
3. Rapid heating , highest temperature of 260º C
4. High-capacity can be charged Nickel cadmium battery, charging time 3 hours
5. Fever needle can be sterilized by high temperature and high pressure , repeated use.
Technical Paraments:
1. Charger voltage: AC110V
2. Battery: 1.2V 2400mAh
3. Power2.5W
4. Weight: about 305g
Packing List:
1x main unit
4x tips
1x Box
1x English manual
Charging：
1.First,charge the instrument by connecting the charging station to a mains power socket
2. Plug the handipece into the socket in the charging station . While the instrument is charging,the LED lights up on the handpiece.
Use:
Fit a cutting tip onto the handpiece.Make sure that the angle of the tip is pointing in the opposite direction to the operating button,This makes work easier.
Important:
Never bend the tip while it is still in the handpiece.
1.Insert the cutting tip into the cavity while it is cold (without pressing the operating button).The gutta-percha point to be cut off must be encircled by the loop of the cutting tip.
2. As soon as the cutting tip is located directly on the canal access,press the operating button.
3.The tip heats up in seconds and the gutta-percha point can be quickly and cleanly removed.
4.After the point has been cut off ,release the operating button. The cutting tip immediately cools down and can be removed from the patient＇s mouth .The operating button is a “contact button” which only switches the button is released,the instrument switches off.
5.Remove the cutting tip from the handpiece after use.
Attention:Please don＇t continue to press the button more than 30 seconds.
---------------------------------------------------
Feature
Feature：
1. LED light clarity and stability
2. 16:1 standard configuration contra angle
3. Can switch 10 kinds of working procedure
4. RPM：120-600 Torque(N.cm)：0.6-4
5. Stands up to the test It's worth getting your hands on
6. High-quality imported motor, high torque, high speed and stable output
7. Small head and easy to operate
8. Ergonomic design easy to carry
9. Built-in high-capacity lithium battery, so it can reduce battery change times and reduce costs for machine
10 kinds working procedure
P1
Positive 360°automatic movement,forward rotation plus reversal torque,then remove the torque to restore forward.
P2
Reverse reciprocating motion system,reverse 150°,forward 30°(approximation)
P3
Reverse 360°automatic movement,reverse rotation plus torque forward,then remove the torque to restore the reversal
P4
Forward reciprocating motion system,forward 150°,reverse 30°(approximation)
P5
Positive 360°,when encounter torque,please stop.Using hand file to reciprocate Contra-angle Handpiece or Anti edge file to remove broken needle.
P6
Reverse 360°,when encounter torque,please stop.Using cutting edge file to remove broken needle.
P7
Forward 360°automatic movement,forward reaches torque reverse ,stop after
removing torque.
P8
Reverse 360°automatic movement,forward reaches torque reverse ,stop after
removing torque.
P9
Continuous forward mode,no torque judgement
P0
Continuous reverse mode,no torque judgement
Technical Specifications:
Main engine Voltage: 3.7Vdc
Battery capacity: 800mAh
Charger input voltage: AC110-220V,60/60Hz
Charger output voltage:5Vdc
input voltage: 1A
Packing list:
The host *1
Charging Dock *1
Lamp holder *2
Power adapter *1
Motor cover *1
Product specification *1
--------------------------------------------------------------------
Obturation System Heated Pen
Feature：
Model：Op-fill can be heat to 200 º C in 3s, can be melting all kinds of Gutta percha.It support the vertical compaction of Gutta percha for the root canal filling. It is intended exclusively for use by trained dentiet only in clinic or laboratory.
Safety caution:
The temperature of tip is very high during the surgery , in order to prevent from being burned, please avoid it directly contact to the soft tissue.
Specification：
Charging system
Operating Voltage DC.3.6V
Adaptor Input: AC 100V/220V 50-60HZ
Power: 10w
Charging time 4 hours
Packing size: 165*125*38mm
Usage:
Heat: Press the button to heat the tip, the Led indicator light red.The tip can reach working temperature within 3 second.
Charge:Put the obturation pen onto the charging base, the LED indicator light blue.The unit should be continuous charging more than 8 hours from low voltage to full charge.
Package includes:
Charging Base-----1 PC
Obturation Pen-----1 PC
-----------------------------------------------------------------------------
Apex Locator
a) Advanced multi-frequency network technology of apex location and automatic calibrating ensure the measurements are accurate.
b) The File clip, Lip hook and Touch probe can be sterilized by autoclaved sterilizer.
c) Compact size and stable design allows for excellent flexibility during procedures.
d) It is not necessary to set the device on zero before measuring each individual canal.
e) Buzzer alert: The buzzer will alert when the file is less than 2mm closed to the apex.
The main technical specifications：
Battery: 3.7V/750mAh
Adapter: 5V/1A
Consumption power: ≤0.5W
Dimensions:14*9*7cm
Operation condition
a) Environment temperature: 5～40℃
b) Relative humidity: 10～85%RH.
c) Atmosphere pressure: 50kPa～106kPa
Package:
1*Main Device
2*Lip hook
2*File clip
2*Touch probe
1*USB Adapter
1*Measuring wire
1* English Manual
--------------------------
2 in 1 Endo Motor+Apex Locator
Description:
- Wireless handpiece,easy operation
- High efficiency,high precision
- It is mainly used for clinical works such as teeth enamel reducing,contouring and so on
- A safe, precise and reliable method to achieve accurate interproximal stripping
- Frequency:2000-16000Hz
Eight ranges:2000/4000/6000/8000/10000/12000/14000/16000Hz
- Main handpiece dimension：φ24.5（max）*157mm（length）
- Handpiece weight：132g (4.7oz)
Package:
Main body*1
contra angle*1
Pushrod*1
5 pcs strips(15HD 25HD 40HD 60HD 90HD)
USB cable*1
English user manual*1
