Dinitrol High Performance Underbody Wax Clear 1L Rust Proofing 1 Unit
Item Description
Characteristics:
Milky / Transparent
Waxy film
Cavity and general applications
High temperature resistance
Water displacing
Good corrosion resistance
Good penetration
Low odour
No dripping, one hour after application
Applications:
DINITROL High Performance Wax is a transparent, low viscous wax for application and corrosion
preventative coating on vehicles such as trucks and busses but also for other objects where
corrosion is a problem. The product is water repellent and high penetrating. Due to its waxy
appearance, it also shows self-healing properties.
After drying, the film formed is resistant to temperature up to 180°C and this makes the product
suitable also for applications in for example engine compartments. After drying the product does
not show any odour problems when heated.
DINITROL High Performance Wax is used for cavities in doors, engins hoods, members,
re-inforcements etc. in all types of vehicles, machines and other equipment. The product is also
highly suitable for applications in the following situations:
Car manufacturing
Bus manufacturing
Trailer manufacturing
Work shops
Body shops
Metal working industries
Ship yards
Method of use:
Shake before use or stir the product thoroughly. The surfaces to be treated must be clean, dry,
rust-, dust- and grease free. DINITROL High Performance Wax can be applied with light airless
equipment with special extension tubes with nozzles or by means of an air-line fed bun or
pressure pot gun with an air-pressure of 3-6 bar. If necessary the product also can be dipped,
rolled or brushed. Depending on the application the product can be thinned with a solvent. The
product can be sprayed haze free and does not drip. Contaminated surfaces and filthy equipment
can be simply cleaned in ?fresh? condition with solvents.
Technical properties:
Colour: milky / transparent
Type of film: wax
Density at 23°C: 850 kg/m³ (Spray can 720 kg/m³)
Viscosity at 23°C: 30 s
Dry matter content: 47% by weight (Spray can 33%)
Flash point: 25°C (Spray can < 0°C)
Aromatic content in solvent: < 0.5%
Rec film thickness: 100 ? 200 ?m (wet)
Drying time: 90 min
Effect on car paint: none
Low temperature adhesion: -25°C
Heat resistance: 180°C
Salt spray test: 1000 hrs
Penetration: 20 mm minimum
Milky / Transparent
Waxy film
Cavity and general applications
High temperature resistance
Water displacing
Good corrosion resistance
Good penetration
Low odour
No dripping, one hour after application
Applications:
DINITROL High Performance Wax is a transparent, low viscous wax for application and corrosion
preventative coating on vehicles such as trucks and busses but also for other objects where
corrosion is a problem. The product is water repellent and high penetrating. Due to its waxy
appearance, it also shows self-healing properties.
After drying, the film formed is resistant to temperature up to 180°C and this makes the product
suitable also for applications in for example engine compartments. After drying the product does
not show any odour problems when heated.
DINITROL High Performance Wax is used for cavities in doors, engins hoods, members,
re-inforcements etc. in all types of vehicles, machines and other equipment. The product is also
highly suitable for applications in the following situations:
Car manufacturing
Bus manufacturing
Trailer manufacturing
Work shops
Body shops
Metal working industries
Ship yards
Method of use:
Shake before use or stir the product thoroughly. The surfaces to be treated must be clean, dry,
rust-, dust- and grease free. DINITROL High Performance Wax can be applied with light airless
equipment with special extension tubes with nozzles or by means of an air-line fed bun or
pressure pot gun with an air-pressure of 3-6 bar. If necessary the product also can be dipped,
rolled or brushed. Depending on the application the product can be thinned with a solvent. The
product can be sprayed haze free and does not drip. Contaminated surfaces and filthy equipment
can be simply cleaned in ?fresh? condition with solvents.
Technical properties:
Colour: milky / transparent
Type of film: wax
Density at 23°C: 850 kg/m³ (Spray can 720 kg/m³)
Viscosity at 23°C: 30 s
Dry matter content: 47% by weight (Spray can 33%)
Flash point: 25°C (Spray can < 0°C)
Aromatic content in solvent: < 0.5%
Rec film thickness: 100 ? 200 ?m (wet)
Drying time: 90 min
Effect on car paint: none
Low temperature adhesion: -25°C
Heat resistance: 180°C
Salt spray test: 1000 hrs
Penetration: 20 mm minimum
About Us
Our aim at World of Lubricant is to provide you with the best possible customer service and value for money.We are approved distributors of LIQUI MOLY brand. This guarantees you that your item is brand new and 100% genuine.If your preferred item is out of stock you can get in touch with us and we will do our best to order it especially for you.
Payments
We currently accept PayPal payment.Once full payment is receive your goods will be dispatched. If there is any issue with payment please contact us through eBay messages.
Shipping
We offer FREE shipping on all orders!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it three or four days after dispatch.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Please be aware that is courier was attemted to deliver parcel 3 times after it come back to us. In this Case £6 handling fee will be applied and deducted from total refund amount
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.The buyer is responsible for return postage costs.You can return a product for up to 30 days from the date you purchased it.Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Feedback
Positive feedback is very important to us and we will always strive to provide 100% customer satisfaction in order to achieve this.Once you have received your item and are happy with the purchase could you please leave a positive feedback and a 5 star DSR.Should for any reason a problem arise, please do not leave a negative / neutral feedback or open a return request please contact us immediately so we are given the chance to rectify the issue amicably.We will provide you with a positive feedback once we have received payment confirmation.The DSR rating 1 to 3 star is equal to negative feedback please always leave a 5 star if we deserve it thanks in advance.
Helpful Links
More Items!
2 x DINITROL 501 FAST CURE WINDSCREEN FITTING BOND ADHESIVE GLUE SEALANT GLASS
£26.99
DINITROL 501 FAST CURE WINDSCREEN FITTING BOND ADHESIVE GLUE SEALANT GLASS 310ML
£16.99
12 x DINITROL 501 FAST CURE WINDSCREEN FITTING KIT BOND ADHESIVE GLUE SEALANT
£166.99
3 x DINITROL 501 FAST CURE WINDSCREEN FITTING KIT BOND ADHESIVE GLUE SEALANT
£62.99
Powered by Frooition
Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.