PLEASE READ & UNDERSTAND THE ENTIRE DESCRIPTION PRIOR TO PURCHASE!

FOR MORE INFORMATION, PLEASE GO TO OUR OFFICIAL DAVIS SPEED EQUIPMENT WEBSITE!

WWW.DAVISSPEEDEQUIPMENT.COM

NOTE THAT EBAY IS NOW CHARGING SALES TAX. OUR WEBSITE DOES NOT (OUTSIDE WI).

NEWLY UPDATED AIR CONDITIONING, POWER STEERING & ALTERNATOR COMBO BRACKET SET FOR
THE 1962-84 194 215 230 250 GM INLINES USING A SAGINAW PUMP, GM DELCO ALTERNATOR & A
SANDEN 508 (SD5) STYLE AC COMPRESSOR.
NOW WORKS WITH BOTH IRON AND ALUMINUM THERMOSTAT HOUSINGS & BOTH INTEGRATED & NON-INTEGRATED CYLINDER HEADS!!

PLENTY OF ADJUSTMENT FRONT TO BACK TO ACCOUNT FOR DIFFERENT BELTING AND PULLEY DEPTHS.

BRACKETS ARE TIG WELDED PLAIN STEEL AND ARE "READY TO PAINT". JUST WIPE DOWN
WITH SOLVENT AND PAINT.

BRACKETS COME WITH HARDWARE & INSTRUCTIONS. DOES NOT INCLUDE PUMP, COMPRESSOR, ALTERNATOR, BELTS OR PULLEYS.

REQUIREMENTS:

1) 194, 215, 230 OR 250 ENGINE.
2) GM SAGINAW TYPE 1 POWER STEERING PUMP. SEE NOTES.
3) GM ALTERNATOR.
4) 2 GROOVE POWER STEERING PUMP PULLEY.
5) TYPICAL AFTERMARKET SANDEN 508 STYLE AC COMPRESSOR.
6) AT LEAST 2 GROOVES ON THE WATER PUMP PULLEY & BALANCER.

WHAT THIS DOES NOT WORK WITH:

1) NOT FOR 292 ENGINES USING 292 STYLE WATER PUMPS. SEE 10009 OR 10010 INSTEAD.
2) IF YOU ARE USING ONE OF THESE ENGINES IN A 1955 1ST SERIES OR OLDER TRUCK
OR A 1948 OR OLDER CAR, THEN THIS WILL BE TOO WIDE. PLEASE SEE 10039 INSTEAD.

NOTES OF INTEREST: 

1) CAN BE USED ON A 292 THAT IS USING A WATER PUMP & THERMOSTAT HOUSING FROM A 250.
2) WORKS WITH ALL STOCK & AFTERMARKET EXHAUST MANIFOLDS AND HEADERS.
3) WORKS WITH ALL INTAKES EXCEPT 3X1.
4) WORKS BEST WITH 6" DIAMETER OR SMALLER WATER PUMP PULLEY SIZE.
5) PS PUMP NEEDS A STUD NEXT TO THE PRESSURE HOSE CONNECTION AS SHOWN. DO NOT USE A STUD AT ANY OTHER LOCATION.
KEYED SHAFT PUMPS ARE RECOMMENDED. 1970 TRUCK 6CYL PUMP WORKS WELL FOR REFERENCE.
SHAPE OF RESERVOIR ISN'T RELEVANT. BOTH "MILK JUG" AND "A-FRAME" STYLES WORK FINE.
6) AC WILL CLEAR ALL POINT, INTERNAL & EXTERNAL COIL HEI DISTRIBUTORS.

ALL DAVIS SPEED EQUIPMENT PARTS ARE MADE IN THE USA.

Design is the property of Davis Speed Equipment, LLC