APPLICATION
stator replaces P/N's:
173-4560 584560 763763
1992-1996(40-50hp-Engines with S.L.O.W.)
1993-2001(4-,50,60&70HP-12AMP-3CyL.Electric Start Engines with S.L.O.W. & Quickstart)
ADVANTAGE
1) Our wire is made of aging resistant material, it is durable and with good electric power.
2) ISO9001:2008 quality control system management .
3) high quality pure copper windings meet or exceed factory specifications.
4) the iron core has been done corrosion resistant treatment, it is not easy to cause problem.
NOTE
This product is designed to be installed by a professional marine mechanic. JETUNIT cannot be held liable for injury or damage resulting from improperinstallation, abuse, neglect or misuse of this product.
SERVICE NOTE: Discoloration of all the battery windings is an indication of a problem in the rectifier/regulator.Discoloration of only one post of the battery windings indicates a problem in the stator.
Q&A
Q:How to install?
1. Remove the negative battery cable.
2. Remove the flywheel.
Q:How to install?
1. Remove the negative battery cable.
2. Remove the flywheel.
3. Disconnect the original stator wires.
4. Using the appropriate pin tool , remove the Black/Yellow Kill wire from the 5 pin connector (in the center position)on the old stator.
5. Remove the original stator, saving the original bolts.
6. Install the new stator using the original bolts with a good thread-locker applied to the bolts and tightened to the factory torque specifications.
7. Insert the Black/Yellow Kill wire into the 5 pin connector (in the center position) on the new stator.
8. Connect the new stator to the power pack.
9. Connect the new stator to the regulator/rectifier (ignore any stripes on the rectifier as the new stator does not require the Yellow wires to be connected to a particular rectifier wire).
10. Replace the flywheel according to the service manual.
11. Replace the battery cable.
Return & Refund
We maintain high standards of excellence and strive for 100% customer satisfaction! We request that you contact us immediately BEFORE you open a case or give us neutral or negative feedback . so that we can satisfactorily address your concerns.it is impossible to address issues if we do not know about them!
1. WORLDWIDE SHIPPING.(Except some contries and APO/FPO)
2.Orders processed timely after the payment verification.
3.We only ship to confirmed order addresses.Your order address MUST MATCH your Shipping address.
4.SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays.Translit times may very,particularly during the holiday season.
5.If you have not received your shipment in item，please contact us.We will track the shipment and get back to you as soon as possible with a reply.Our goal is customer satisfaction!
There are hundreds of parts we have no time to publish.If you want to know how wholesale the products,please contact us for the price and details
4. Using the appropriate pin tool , remove the Black/Yellow Kill wire from the 5 pin connector (in the center position)on the old stator.
5. Remove the original stator, saving the original bolts.
6. Install the new stator using the original bolts with a good thread-locker applied to the bolts and tightened to the factory torque specifications.
7. Insert the Black/Yellow Kill wire into the 5 pin connector (in the center position) on the new stator.
8. Connect the new stator to the power pack.
9. Connect the new stator to the regulator/rectifier (ignore any stripes on the rectifier as the new stator does not require the Yellow wires to be connected to a particular rectifier wire).
10. Replace the flywheel according to the service manual.
11. Replace the battery cable.
Q:The original item used to be fully enclosed, while the coils in the current stators are exposed?
The original stator is fully enclosed,it is easy to be too hot，so we make is to be exposed.Q:How do you find the parts you want?
For this type of part, we need an OE / Manufacturer’s part number off the actual unit being replaced. Parts can differ even within the same model year, so the actual number is required to confirm the correct replacement item you need. If you are unable to locate the part number, a manufacturer or a dealer should be able to confirm the correct part number for you.If you still can't find your OEM number, please tell us your serial number and we will find it for you.Q.how to find the original serial number?
Evinrude outboard engines have a serial number label that is located on the transom bracket. Serial number labels will reference the date of manufacture for the engine by providing visibility of the month and year the engine was produced. For example, if an engine was manufactured in May of 2012, the serial number label will reflect 05/2012 directly below where the serial number is indicated. When a significant product change occurs (i.e. when a new model is introduced that replaces a prior version), the model designation will change as needed. By utilizing this process, models with the same code are physically identical, regardless of when they were built. To view the dateof manufacture,reference the serial number label that is located.
If you are not satisfied with the purchased product, please return it within 30 days after receipt, and we will give you full money back.We regret that we are unable to cover return shipping costs，refund the original shipping，paypal transaction fee and ebay transaction fee unless the return was due to our error.
About Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction! We request that you contact us immediately BEFORE you open a case or give us neutral or negative feedback . so that we can satisfactorily address your concerns.it is impossible to address issues if we do not know about them!
About Shipment
1. WORLDWIDE SHIPPING.(Except some contries and APO/FPO)
2.Orders processed timely after the payment verification.
3.We only ship to confirmed order addresses.Your order address MUST MATCH your Shipping address.
4.SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays.Translit times may very,particularly during the holiday season.
5.If you have not received your shipment in item，please contact us.We will track the shipment and get back to you as soon as possible with a reply.Our goal is customer satisfaction!
About Wholesale
There are hundreds of parts we have no time to publish.If you want to know how wholesale the products,please contact us for the price and details
