Dinitrol Metallic Brown Rust Proofing Car Underbody Wax 500ML Aerosol 2 Units
Item Description
DINITROL Metallic is an underbody product for the treatment of vehicles during production, in import facilities and for the repairs market. When applied to a clean, dry surface, it adheres to both lacquered surfaces and those coated with PVC or similar. Zinc, rubber and plastics remain completely unimpaired. Clean and economical treatment during production is guaranteed by the simple applicability of the product and its high solid content. DINITROL Metallic is suitable for use with spare parts, machines and iron and steel structures in very corrosive environments. It is also suitable as a corrosion inhibitor during transport and storage as well as for longer-term transport or storage under extremely corrosive conditions.
Benefits
Temperature resistant
Low temperature flexible
Stonechip resistance
Excellent corrosion protection
Long-lasting
Application
DINITROL METALLIC is an underbody protection product which is used in vehicle construction and repair. Applied onto a dry and clean surface, it adheres well to lacquered substrates, as well as those treated with PVC or similar.
Zinc, rubber and plastic surfaces are not attacked by the product. The product?s excellent application properties and high solid content guarantee clean and easy processing.
DINITROL METALLIC is suitable for protecting untreated surfaces, machines, and iron and steel objects in highly corrosive environments. DINITROL METALLIC can be used for transport and storage protection in extreme conditions.
Method of use
Leave the aerosol at room temperature (16 ? 20°C). Shake the can before use until the steel ball can clearly be heard. The surface must be dry and free from rust and grease. Spray at a distance of 20 ? 30 cm.
In order to achieve optimal corrosion protection, a wet film of 1 ? 2 mm should be applied. Thicker layers can be applied in areas where a higher degree of protection is required against mechanical factors. Leave to dry at room temperature.
In order to prevent any valve blockages, hold the can downwards after use and briefly spray pure gas.
Pre-treatment Substrates
The surface must be clean, dry and free from corrosion. DINITROL Metallic can be applied in two layer systems with e g DINITROL ML and DINITROL 3650 as pre-treatment.
Over-Coating / 2-Layer-Application
DINITROL Metallic shall not be over-painted or over-applied. For additional information, please consult DINOL GmbH.
Storage
The product should be stored at 15 ? 30°C and the shelf life is then 2 years.
Technical Data
Colour brown
Type of film hard, waxy
Density at 23°C 1090 kg/m³
Viscosity at 23°C 800 mPas
Dry matter content 62 % by weight
Flash point 41°C
Aromatic content in solvent < 0,5%
Recommendes film thickness wet 700 ?m
Recommended film thickness 300 ? 500 ?m
Drying time 6 ? 12 hours
Low temperature adhesion - 20°C
Effect on car paint none
Removability White Spirit
Heat resistance > 130°C
Salt spray test 1500 hours
Application temperature 15 ? 30°C
Available in 1 L Can, 60 L Drum, 208 L Drum, 900 L Container
Benefits
Temperature resistant
Low temperature flexible
Stonechip resistance
Excellent corrosion protection
Long-lasting
Application
DINITROL METALLIC is an underbody protection product which is used in vehicle construction and repair. Applied onto a dry and clean surface, it adheres well to lacquered substrates, as well as those treated with PVC or similar.
Zinc, rubber and plastic surfaces are not attacked by the product. The product?s excellent application properties and high solid content guarantee clean and easy processing.
DINITROL METALLIC is suitable for protecting untreated surfaces, machines, and iron and steel objects in highly corrosive environments. DINITROL METALLIC can be used for transport and storage protection in extreme conditions.
Method of use
Leave the aerosol at room temperature (16 ? 20°C). Shake the can before use until the steel ball can clearly be heard. The surface must be dry and free from rust and grease. Spray at a distance of 20 ? 30 cm.
In order to achieve optimal corrosion protection, a wet film of 1 ? 2 mm should be applied. Thicker layers can be applied in areas where a higher degree of protection is required against mechanical factors. Leave to dry at room temperature.
In order to prevent any valve blockages, hold the can downwards after use and briefly spray pure gas.
Pre-treatment Substrates
The surface must be clean, dry and free from corrosion. DINITROL Metallic can be applied in two layer systems with e g DINITROL ML and DINITROL 3650 as pre-treatment.
Over-Coating / 2-Layer-Application
DINITROL Metallic shall not be over-painted or over-applied. For additional information, please consult DINOL GmbH.
Storage
The product should be stored at 15 ? 30°C and the shelf life is then 2 years.
Technical Data
Colour brown
Type of film hard, waxy
Density at 23°C 1090 kg/m³
Viscosity at 23°C 800 mPas
Dry matter content 62 % by weight
Flash point 41°C
Aromatic content in solvent < 0,5%
Recommendes film thickness wet 700 ?m
Recommended film thickness 300 ? 500 ?m
Drying time 6 ? 12 hours
Low temperature adhesion - 20°C
Effect on car paint none
Removability White Spirit
Heat resistance > 130°C
Salt spray test 1500 hours
Application temperature 15 ? 30°C
Available in 1 L Can, 60 L Drum, 208 L Drum, 900 L Container
About Us
Our aim at World of Lubricant is to provide you with the best possible customer service and value for money.We are approved distributors of LIQUI MOLY brand. This guarantees you that your item is brand new and 100% genuine.If your preferred item is out of stock you can get in touch with us and we will do our best to order it especially for you.
Payments
We currently accept PayPal payment.Once full payment is receive your goods will be dispatched. If there is any issue with payment please contact us through eBay messages.
Shipping
We offer FREE shipping on all orders!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it three or four days after dispatch.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Please be aware that is courier was attemted to deliver parcel 3 times after it come back to us. In this Case £6 handling fee will be applied and deducted from total refund amount
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.The buyer is responsible for return postage costs.You can return a product for up to 30 days from the date you purchased it.Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Feedback
Positive feedback is very important to us and we will always strive to provide 100% customer satisfaction in order to achieve this.Once you have received your item and are happy with the purchase could you please leave a positive feedback and a 5 star DSR.Should for any reason a problem arise, please do not leave a negative / neutral feedback or open a return request please contact us immediately so we are given the chance to rectify the issue amicably.We will provide you with a positive feedback once we have received payment confirmation.The DSR rating 1 to 3 star is equal to negative feedback please always leave a 5 star if we deserve it thanks in advance.
Helpful Links
More Items!
DINITROL 4010 HIGH TEMPERATURE RUST PROOFING ENGINE COATING WAX 500ML AEROSOL
£23.70
DINITROL 4010 HIGH TEMPERATURE RUST PROOFING ENGINE CLEAR WAX 500ML AEROSOL 2x
£41.89
DINITROL 4010 HIGH TEMPERATURE RUST PROOFING ENGINE COAT WAX 500ml AEROSOL 4x
£68.89
DINITROL 4010 HIGH TEMPERATURE RUST PROOF ENGINE COAT WAX 500ml AEROSOL 12x
£159.89
Powered by Frooition
Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.