Wurth HHS 2000 High Pressure Adhesive Lubricant.

Eliminates squeaks and creaks and has excellent flow and penetration performance, as well as good corrosion protection.Highly adhesive lubricant that is not spun away when used on turning and rotating parts.  Compatible with O-rings/X-rings and plastics. Neutral behaviour on painted substrates. Resistant to splash water and salt water, weak acids and bases Free from silicone, resin and acids

Notice

Resistance to high pressure loads

The HHS 2000 lubricating film remains active and does not tear off despite the high pressure load and shearing motion of the base body. Reliably separates the counterpart-body from the base body and thus ensures optimum wear protection at higher pressure loads. This is only possible for dirt-free lubricating points, which is why we recommend a thorough and careful pre-clean with HHS Clean prior to application, art. 089310610.

Chemical basis     Hydrocarbon

Oil basis               Mineral oil

Colour                  Yellowish

Smell/fragrance    Oil

Density                 0.742 g/cm³

Density conditions at 20°C

Min. temperature conditions -25 °C

Max. temperature conditions  180 °C

Max. temperature resistance  200 °C

Min. flashing point of active ingredient  300 °C

Kinematic oil basis viscosity  1500 cSt

Silicone-free            Yes

Acid-free                  Yes

Resin-free                Yes

AOX-free                  Yes

Resistance against    Salt waterWeak lyesWeak acidsSplash

Container                Can

Shelf life from production  24 Month