DIALUX JEWELRY POLISHING COMPOUNDS
3 BAR ASSORTMENT For GOLD - SILVER - COPPER - BRASS 
1 BAR OF EACH TYPE OF DIALUX®  PREMIUM BRAND   

RED  /  YELLOW   /  WHITE  

DIALUX® Brand polishing compounds originally formulated in France has been a popular polishing compound for over 50 years.  The Dialux® polishing compounds are a high grade premium line of compounds specifically formulated for Precious Metals in Jewelry Polishing used by Goldsmiths and Silversmiths. "A-1 TOP QUALITY" the Very Best polsihing compounds. These are "Original" compounds not similar ones from CHINA.

The assortment has 1 Bar of each polishing compound formulation for Non-ferrous Metals by Dialux® Brand for Gold Silver Copper and Brass

Dialux®   POLISHING & FINISHING COMPOUNDS   Made by Lippert/Unipol

Bar size: 4" x 1" x 1-1/8"  - 100mm x 25mm x 30mm

Bar Weight: 120 Grams - 4 Oz.

 .

·       RED "ROUGE DE PARIS" - Used for Super Finishing yellow color metals, especially Gold.

·       YELLOW "JAUNE" - Bright Shine, buffing compound for Brass, Copper, Bronze, Soft Metals (Note:  The Yellow Dialux Bar color is actually a BROWN tone, the name & label is Yellow)      

·       WHITE "BLANC" -  Bright Polish on White Metals - Silver

 

Sale is for 3 Bars 

NOTE: We have included polishing recommendations at the bottom of this page, to assist you.

NOTE: Visit  JETS INC.  our ebay Store Listings, where you can see INDIVIDUAL Dialux® Polishing Compounds and Polishing Buffs and Felt Buffing Wheels along with a selection of  Jewelers Equipment Tools & Supplies. JETSINC.

 

POLISHING RECOMMENDATIONS:

Our recommendations and suggestions on Buffing to obtain the best results possible:

·        Use the right compound for the metal that you are trying to polish

·        It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.

·        Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.

·        Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.

·        Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals.  If you have to then make sure buffs are cleaned (dressed) with a buff rake.

·        A clean buffing wheel edge is important.

·        Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process.      

·        Whenever you are working with Platinum never use a buff that was used for another type of metal.

 

WORK SAFE!   Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed.  Protect yourself, your fingers and hands, your face and eyes and use respirators. An Apron or Smock is not a bad idea.

E 10  721 CKSP   Z  M P