Genuine NGK ILTR6E11 x 6  ( 6 Pack) (90117) Iridium Spark Plugs 
for Holden Commodore VE and VF Series
Vehicle Fitment

The NGK ILTR6E11 spark plug is used in a variety of vehicles, primarily those with specific General Motors (GM) and Ford engines.

Some of the most common applications include:

  • Holden Commodore (VE and VF series) with the 3.0L and 3.6L V6 SIDI (Spark Ignition Direct Injection) engines (engine codes like LLT, LFX, LF1, LFW, and some LPG versions).
  • Holden Calais/Caprice/Statesman (VE, WM, VF, WN series) with the 3.6L V6 engines.
  • Holden Captiva 7 with the 3.0L V6 engine.
  • Cadillac CTS with the 3.6L V6 engine (various years).
  • Chevrolet Camaro with the 3.6L V6 engine (various years).

(1)   NGK ILTR6E11 x 6 Iridium S/P for Holden Commodore VE and VF Series

(2)   NGK ILTR6E11 x 6 Iridium S/P for Holden Calais/Caprice/Statesman (VE, WM, VF, WN series) with the 3.6L V6 engines.

(3)   NGK ILTR6E11 x 6 Iridium S/P for Holden Captiva t with the 3.0L V6 Engines

(4)   NGK ILTR6E11 x 6 Iridium S/P for Cadillac CTS with the 3.6L V6 engine

(5)   NGK ILTR6E11 x 6 Iridium S/P for Chevrolet Camaro with 3.6L V6 Engine

Ford F-150 / F-250 / F-350 Super Duty with the 6.2L V8 engine (Dual Plug setup, requiring 16 plugs).

(6)   NGK ILTR6E11 x 16 Iridium S/P for Ford F-150 /F-250 /F-350 Super Duty with the 6.2L V8 engine

 

Chevrolet Traverse and Buick Enclave with the 3.6L V6 engines.

GMC Terrain and Chevrolet Equinox with the 3.0L or 3.6L V6 engines.

(7)   NGK ILTR6E11 x 6 Iridium S/P for Chevrolet Traverse and Buick Enclave with the 3.6L V6 engines

(8)   NGK ILTR6E11 x 6 Iridium S/P for GMC Terrain and Chevrolet Equinox with the 3.0L 3.6L V6 engines

To ensure you get the correct part for your vehicle, it is highly recommended to check the specific year, model, and engine size of your car against a trusted parts catalog or your owner's manual. Small variations in engine codes or model years can sometimes require a different spark plug.

 

 

Thread Diameter: 14mm                               

Thread Pitch: 1.25mm

Seat Type: Tapered

Reach: 25mm (1")

Hex Size: 5/8" (16mm)

Terminal Type: Solid

Overall Height: JIS

Gap: .043" (1.1mm)

Center Electrode

Material: iridium

Type: Fine Wire

Size: 0.6mm

Projection: Projected

Ground Electrode

Material: Platinum

Type: Standard

Quantity: 1

Specifications

Resistor: Yes

Resistor Value: 5k Ohm

Heat Range: 6

Torque Specs: Cast Iron: 10.8-18 lb. ft. Aluminum: 7.2-14.5 lb. ft.

Warranty: 60 Days

Longevity: 100k Miles