Problem: Traditional coolants can offer varying wear and corrosion results depending on the material.Solution: A micro-emulsion formula offers premium lubrication across gray irons, mixed metals and titanium alloys.TRIM® MicroSol® 585XT is a high-lubricity and semi-synthetic microemulsion coolant. The formula delivers extended sump life and better foam control versus previous-generation semi-synthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you'd expect from a premium TRIM® coolant. While it is particularly well-suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol® 585XT has proven to be an exceptional machining fluid for titanium alloys.
Applications
MicroSol 585XT performs well where traditional soluble oils may not cool sufficiently.
In mixed-metal situations, concentration control is critical to fight galvanic corrosion (7.5% plus).
Running at or above 7.5% offers the best sump life and corrosion inhibition on cast iron chips.
MicroSol 585XT is not recommended for use on very reactive metals such as magnesium.
Features
Dramatically extends useful life without the need for tank-side biocides or fungicides.
Low foaming for todays' demanding high-pressure, high-volume applications.
Compatible with a very wide range of material including cast iron, steels, copper, titanium and aluminum alloys and many plastics and composites.
Optimized combination of cooling and lubricity for titanium machining applications.
Provides superior corrosion inhibition on cast iron and eliminates ""hot chip"" and clinkering problems.
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys.
Contains no nitrites, triazines, phenols, chlorinated or sulfurized EP additives.
Provides superior corrosion inhibition on all ferrous and non-ferrous metals.
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance.
Requires no special disposal or recycling techniques.
Technical Data
Recommended usage concentration in water: 4.0% - 10.0%.
To help ensure the best possible working solution, add the required amount of concentrate to the required amount of water (never the reverse) and stir until uniformly mixed.
Use premixed coolant as makeup to improve coolant performance and reduce coolant purchases. The makeup you select should balance the water evaporation rate with the coolant carryout rate.
Use mineral-free water to improve sump life and corrosion inhibition while reducing carryoff and concentrate usage.