Description
YR2050 Milliohm Meter High-Precision Handheld DC Micro Ohm Meter Low Resistance Meter Tester
Description:
This is a high-precision and cost-effective milliohm meter, which also has the functions of calculating square number, meter number and resistivity. It is suitable for testing wires such as milliohm resistance, current-sensing resistance, power cord, wire, and network cable.
Although it is not for testing battery, it can test the resistance of transformers, motors, large inductance inductors, etc., and higher accuracy can be used to detect the resistance of precision current-sense resistors.
Applications:
1. Cut a certain length, such as 1m. Measure the diameter to calculate the cross-sectional area, enter the instrument detection mode, enter the corresponding parameters, and measure the resistance of the wire to calculate the resistivity. The resistivity can determine whether the wire material is pure copper.
2. For a coil of wire, measure the diameter of the wire to calculate the cross-sectional area, enter the instrument detection mode, enter the corresponding parameters, and select the wire material, such as copper. Find out the overall resistance at both ends of the wire to calculate the length of the wire and judge whether the length of the wire is sufficient.
3. Check whether the transformer winding is qualified. In the normal mode, open the upper and lower limits, and input the upper and lower limits of resistance to test the resistance of the transformer winding.
4. Motor repair. The winding resistance of a high-power motor is extremely small. If there is a short circuit between the same winding wires, it is difficult to detect it with the resistance file of a multimeter. You can compare the resistance value of the normal winding in the normal mode.
5. Power cord detection. The quality of the three-hole power cords for household appliances on the market is uneven. You can use the detection mode to input the length and material of the power cord, such as copper, and measure the resistance to calculate the cross-sectional area of the wire.
6. Contact resistance detection, whether all kinds of connectors, telescopic probes and wiring terminals are in good contact can be judged by the resistance value.
7. Test milliohm resistance such as current-sense resistance and shunt.
Parameters:
- Resolution 120000
- Temperature drift: ±100ppm (10~40â)
Gear Minimum position Accuracy indication ±(reading%+range%)
1Ω 0.01mΩ ±(0.12%+0.03%)
10Ω 0.1mΩ ±(0.08%+0.02%)
100Ω 1mΩ ±(0.08%+0.02%)
1KΩ 10mΩ ±(0.10%+0.03%)
Attention:
- Built-in 18650 rechargeable battery, without a separate charger, you can use phone charger for Android to charge.
- It is strictly forbidden to measure any live devices, because the AC and DC voltage input to the test interface may damage the instrument.
- To ensure the accuracy and safety of the machine, please store and use it in a dry and non-corrosive gas environment.
Package Included:
- 1 x Milliohm Meter
- 1 x Pair of Clips
Description:
This is a high-precision and cost-effective milliohm meter, which also has the functions of calculating square number, meter number and resistivity. It is suitable for testing wires such as milliohm resistance, current-sensing resistance, power cord, wire, and network cable.
Although it is not for testing battery, it can test the resistance of transformers, motors, large inductance inductors, etc., and higher accuracy can be used to detect the resistance of precision current-sense resistors.
Applications:
1. Cut a certain length, such as 1m. Measure the diameter to calculate the cross-sectional area, enter the instrument detection mode, enter the corresponding parameters, and measure the resistance of the wire to calculate the resistivity. The resistivity can determine whether the wire material is pure copper.
2. For a coil of wire, measure the diameter of the wire to calculate the cross-sectional area, enter the instrument detection mode, enter the corresponding parameters, and select the wire material, such as copper. Find out the overall resistance at both ends of the wire to calculate the length of the wire and judge whether the length of the wire is sufficient.
3. Check whether the transformer winding is qualified. In the normal mode, open the upper and lower limits, and input the upper and lower limits of resistance to test the resistance of the transformer winding.
4. Motor repair. The winding resistance of a high-power motor is extremely small. If there is a short circuit between the same winding wires, it is difficult to detect it with the resistance file of a multimeter. You can compare the resistance value of the normal winding in the normal mode.
5. Power cord detection. The quality of the three-hole power cords for household appliances on the market is uneven. You can use the detection mode to input the length and material of the power cord, such as copper, and measure the resistance to calculate the cross-sectional area of the wire.
6. Contact resistance detection, whether all kinds of connectors, telescopic probes and wiring terminals are in good contact can be judged by the resistance value.
7. Test milliohm resistance such as current-sense resistance and shunt.
Parameters:
- Resolution 120000
- Temperature drift: ±100ppm (10~40â)
Gear Minimum position Accuracy indication ±(reading%+range%)
1Ω 0.01mΩ ±(0.12%+0.03%)
10Ω 0.1mΩ ±(0.08%+0.02%)
100Ω 1mΩ ±(0.08%+0.02%)
1KΩ 10mΩ ±(0.10%+0.03%)
Attention:
- Built-in 18650 rechargeable battery, without a separate charger, you can use phone charger for Android to charge.
- It is strictly forbidden to measure any live devices, because the AC and DC voltage input to the test interface may damage the instrument.
- To ensure the accuracy and safety of the machine, please store and use it in a dry and non-corrosive gas environment.
Package Included:
- 1 x Milliohm Meter
- 1 x Pair of Clips
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
