Plug and Play Surface Mount Camera Kit, Fits 2020-2021 Tacoma

Camera is FMVSS 111 compliant!  New Product in stock and ready to ship! This is a plug and play camera kit that will allow you to mount a camera on your camper or trailer and have it plug into the existing camera connector behind your rear bumper. 

This universal camera is surface mounted so it will require a flat section approximately 1" x 1" for mounting.  Drill a small hole and run the cable through to your factory backup camera connection.

Use this camera for salt spreaders, bed campers, 5th wheel applications, airstream tailgates, and any other application where you are required to remove your factory tailgate. 

Kit includes the following:

• Surface mount Super CMOS camera with night vision and optional parking lines
• Mounting hardware
• Factory integration cable (plugs in under the box just in front of the rear bumper, uses the same connector as your factory camera).  Cable is 6' long so it can be mounted by the license plate or in a higher mounting location on a drop in camper, utility bed, etc.
• 3 year warranty!

Camera Specifications:

• Super CMOS chip - outstanding color, contrast, and clarity!
• Removable parking guidelines
• 170 degree view
• 600 TV lines of resolution
• .1 lux minimum illumination - Outstanding night vision!

2020-2021 Tacoma with factory installed backup camera.

NOTE: vehicle must have come from the factory with a rear camera in order for this kit to function. 

• SKU : CS-20TAC-RSM
• Color :
• Camera Resolution : 600 TVL
• Lockpick A/V Inputs :
• Lockpick A/V Outputs :
• Lockpick Bluetooth Input :
• Includes Remote :
• Overall Dimensions :
• product_type : AutoAccessoryMisc
• Screen Resolution :
• Sensor Type : Super CMOS
• Sound Options :
• 3G :
• Cloud/P2P Support :
• Supported OS (CMS) :
• Color :
• Compressed Format :
• Dimensions :
• Features :
• Frame Rate :
• Image Sensor :
• Interface :
• Interoperability :
• IR Range :
• Max Image Resolution :
• Min Illumination :
• Motion Detection :
• Network :
• ONVIF Support :
• Operating Conditions :
• Playback Modes :
• Playback Resolution :
• POE :
• Power Supply :
• Privacy Masking :
• Processor :
• Protocols :
• Recording Mode :
• Remote View :
• Storage :
• Storage Options :
• Video Compression :
• Video Input :
• Video Output :
• Weatherproof Rating :
• Weight :
• WiFi :
• Zoom :
• Split Screen :
• Vehicle Interface :
• Camera Input Ports :
• Video Input Type :
• Video System : NTSC
• Viewing Angle : 170 Degrees
• Waterproof/Dustproof Level : IP 68 Camera
• System Manufacturer : EVI Systems
• Warranty : 3 Year
• Wiring Type : Factory Plug&Play

Camera is drill-in style for flat mounting.  It will require a flat section approximately 1" x 1" for mounting.  Drill a small hole and connect the camera harness to the OEM conversion harness. 

Run the cable to your factory backup camera connection under the truck and plug it in.