USA SHIPPER - FAST FREE SHIP


GENUINE AimTrak LIGHT GUN With RECOIL
Color: RED

THIS LISTING Recoil guns are shipped WITH TESTED 24V 4A recoil power supply for best performance between recoil strength and rapid continuous shots.

  • Emulates a USB mouse and game controller. No drivers required.
  • Compatible with all PC OSes and Playstation 2
  • Linux Support (Third Party)
  • Works with all monitors including CRT, LCD, Plasma
  • Accurate aim (after calibration) for games which do not have on-screen crosshairs.
  • Up to 4 guns can be used together

Arcade-quality gun with two buttons and trigger. Ready to play. Available in Blue, Black, or Red (see our other listings)


Recoil Power Requirement (Power supply included)

The recoil power is routed via the connecting cable and the power supply needs to have a connector with outer diameter of 5.5mm and inner of 2.1mm.

The ideal voltage is 24-36 Volts.

At 36V the power supply needs to have a current capacity of 2-3 amps. If you use a 3 amp supply this will give maximum power. DO NOT use a 36V supply with a current capability of greater than 3 amps as the mechanism relies on the current-limiting feature on the supply to prevent overload. If using two or more guns you can share supplies but energy will be reduced if firing simultaneously.

If using a 24V supply the current specification of the supply can be 4 Amps.

So to recap, max specification is:
24V 4 Amp
or
36V 3 Amp

Exceeding the above will invalidate the warranty. Warranty on the recoil mechanism is 1 year.

The center pin of the connector is positive. Outer barrel negative.


Box Contains:

  • Complete gun with 2 buttons.
  • 4 Meter USB Cable
  • LED Bar for mounting on top of monitor.
(if you purchase 2+ guns we send only 1 sensor since that's all you need if they are used on the same unit... if you need 2 sensors please specify during checkout or send us a message.)


Please note: to give you the best deal and fastest shipping we buy these items in bulk and ship with generic packaging.


RETURNS: Buyer is responsible to verify compatibility with their hardware/software BEFORE making purchase.  Buyer is responsible to figure out set-up/calibration; if you have trouble with set-up/calibration contact us for help before requesting a return.  If return is requested claiming gun "doesn't work or defective" restocking fees and shipping both ways will be deducted!  For "changed mind" or any other return reason, if guns are opened/used restocking and shipping both ways will be deducted, otherwise just shipping costs.  BE SURE BEFORE YOU PURCHASE!