Store category

Sign Up Now !

You may also like

Product Description


30 Inch T12/HO/RDC waterproof LED directly relamps and replaces the 40/42 watt 30" fluorescent bulb F30T12/HO without rewiring or modification. It's a Plug and play product from our "Relamp Series" when switching to LED lighting. T12/HO bulb works with traditional magnetic ballasts and modern electronic ballasts for maximum convenience. Also fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.

 

Installing the lamp, as easy as changing a bulb:

  1. Turn power OFF before installation
  2. Remove the existing lamp
  3. Install LED T12/HO
  4. Switch on power

General Specifications:

  • Energy saving of 43% from 40/42 watts to 23 watts with 2530 lumens output
  • Energy saving of 33% from 40/42 watts to 27 watts with 2970 lumens output
  • All plastic diffuser for better light distribution, less spot reflections
  • O Rings to waterproof rotating caps and sealed diffuser for indoor and outdoor applications
  • Heavy duty aluminum heat sink ensures the LED run cooler for longer
  • Plastic and aluminum construction ensures less breakage
  • Long life span of > 50,000+ hours
  • High lumen output > 110 lumens/watt
  • 6000 kelvin daylight light appearance
  • Uses 23,27 watts = 40/42 watts equivalent
  • 1 bulbs per package
  • Single Sided - 2530 lumens
  • Dual Sided - 2970 lumens
  • Nominal length 30-inch T12 (1-1.5inch diameter)
  • Maximum overall length (M.O.L): Approx. 27.91” (708.9 mm) with pins
  • A.k.a T-12 High output Recessed Double Contact (RDC)
  • Rotatable R17d end cap that swivels
  • End cap can be adjusted regardless of socket orientation in the sign
  • Special application lamps that are designed for cold weather
  • Technical description: F30T12/HO, F30"T12/HO/RDC, High output T12 HO
  • Suitable as Walk-in Cooler, Freezer and Refrigeration equipment lighting
  • Ideal for vertical or horizontal installation, single-sided or double-sided signs
  • Perfect for Gas stations, Signage, Billboards, cold weather
  • Works with electronic and magnetic ballast only!
  • Ballast operated lamp, not bypass compatible

Equivalent replacement for:

  • F30T12/CW/HO
  • F30T12/D/HO

Why Plug & Play LED?

Simplicity for installer - The lamp snaps into the existing fixture without any wiring modifications, installation can be done by virtually anyone, as long as your existing ballast is compatible.

Safety - Whenever we can shorten the time someone has to spend dangling from a ladder, things are automatically safer.

No upfront cost - eliminate the need to hire a costly electrician to do modification.

Energy efficient - output on lamp is significantly improved with ballast for general consumption and commercial use.

Relamp LED products are designed and developed by New York LED Luminaries, Inc, Brooklyn, NY.

We accept the following:

 

PayPal

Mastercard

Visa

American Express

Discover

Has my order been shipped?

 

You will receive a shipping confirmation email once your order is processed for shipping. There will be a link in the email which you can use to track the shipping status of your order. Due to congestion of USPS network, packages will take a longer processing time, please allow time for USPS page to populate.

How do I cancel my order?

As we process orders automatically, it may not be possible to cancel an order between the times of placing the order and delivery. Please email our sales team for further assistance.

Returns, Replace, Refunds & Cancellations

How can I return my product and request a refund?

We hope you are entirely satisfied with your purchase, but if you are dissatisfied, we will issue a refund within 30 calendar days from the date of delivery of the product. You should email us for steps to take on returns, defective LED or order cancellations etc.

About New York LED Luminaries (NYLL)

 
NYLL, New York LED Luminaries, is located at 4117 New Utrecht Ave., Brooklyn, New York. Two entrepreneurs worked on LED retrofit kit and have found that the retrofit kit is complicated and time consuming when installed into the current light fixtures with fluorescent lamps. They focused on developing T8 and T12 LED tubes that can directly replace the glass fluorescent lamps without modifications. At the end of 2013, they have developed the first generation LED tubes that work with magnetic and electronic ballasts. Currently, they have further developed the technology of direct replacement for all the linear T8 and T12 fluorescent lamps up to 8 feet. Their design which are also compatible with magnetic and electronic ballasts for G13, FA8 and R17D lamp base/holder.

You can contact NYLL support from 9am-5pm EST, M-F. Please provide us with a brief description of any error observed during installation or product defects you may have received, as well as the order number from the order. We are happy to provide solutions to any relamping questions.

Ordering in Bulk? We can help.

Contact us via email 9am-5pm EST, M-F for more information.

PushAuction
DataCaciques