When ordering from the US, parcels may be subject to import tax and duty charges, which the buyer is responsible to pay.
One new 250MHZ Oscilloscope clip probe w/ readout pin X10 Tektronix HP RIGOL
Description
ebay kits Template
 



 
New 250MHZ Oscilloscope probes for Tektronix and HP Oscilloscope scope with read-out pin, X10, 1 unit + accessories

Introduction: 

Alphanumeric information displayed on an oscilloscope screen to provide waveform scaling information, The TX5125 series is a passive high impendence oscilloscope probe designed and calibrated for use on instruments having an input impedance of 1M Ohm shunted by 18pF. However, it may be compensated for use with instruments have an input capacitance of 10-35pF. And within the box cover located near the BNC have three adjust component for the high frequency Trimmer adjustment.
The kind of probe is designed for oscilloscope with readout function. Fixed attenuator rate:X10,. High frequency and low frequency compensation trim. System Bandwidth up to 250MHz


TX5100 Series

 

Low Frequency Compensation Adjustment:

  • Low frequency response can be matched to the oscilloscope by adjusting the compensation trimmer on the head of the probe.
  • Connect the probe to the oscilloscope and to a 1Khz square waveform source
  • Set the oscilloscope to display two to the three cycles and two to six vertical divisions.
  • Carefully adjust the trimmer tool to obtain the flattest tops to the square waves displayed on this oscilloscope,
  • High Frequency compensation adjustment


High Frequency Compensation Adjustment

The high frequency compensation box cover located near the connector, Use the BNC adapter, connected the probe to a square wave generator operating between 10kHz to 1Mhz, to 1Mhz terminated into 50ohms. The square wave generator rise time should be approximately 125ns, Adjust each control until the leading edge of the waveform is as flat, square and horizontal as possible


Texas P5125 Series Probes

  • General Purpose, Bench or Field
  • Economical, Yet High Quality
  • High Input Impedance (X10 range)
  • Compensation (X10 range)

Features:

    • Useable with scopes having Bandwidth DC to 250 MHz
    • Rise time: 1.4ns
    • Interchangeable Probe Tip
    • Modular Construction
    • Compensation range: 5 to 30 pF
    • Input Capacitance: 12pF
    • Input Resistance: 10Mohm when used with Oscilloscopes with 1Mohm input;
    • Bandwidth: 10X: 250MHz
    • Net Weight: 55g
    • Cable Length: 120cm
    • Operating Temp: -10C-50C
    • Operating Humidity: <=80%
    • Maximum Input Voltage: 600 VDC (DC+peak AC)

 

TX5100 series Readout Passive-probe
Model#: Attenuator System
Bandwidth
(3dB)MHz:		 System
Rise-time(ns)		 Compensation
Range (pf):		 Voltage
Max.
(V)		 Input Res.
(M)		 Input Cap.
(Pf):		 GND.
Ref:
TX5115 X10 150 2.33 5-30 600 10 15 X
TX5120 X10 200 1.75 5-30 600 10 15 X
TX5125 X10 250 1.4 5-30 600 10 12 X
TX5130 X10 300 1.16 5-30 600 10 15 X

 

The package includes:

1) One 250MHZ Oscilloscope probes with Mini Alligator Clip and ground lead;

2) 1 Screwdrivers;

3) 2 marker bands;

4) 1 tip locating sleeves.

Shipping/Return Policy:

1) Normally your order will be shipped within 1-3 business days after your payment is clear,  you will receive an e-mail that confirm your order has been shipped within 1-3 days after we receive the payment.

2) For domestic order, the delivery time is 3-5 days by USPS first class mail, the track number is available upon request, Fast shipping is always available by paying USPS express shipping cost.

3)International shipment: The delivery time to Europe is around 7-14 days via postal office air letter/parcel post, there is NO track number for this method, According to our experience, 1%  packages will got lost by using this method. You are very welcomed to buy insurance in order to avoid this 1% risk. Or you can paying more for USPS express shipping with track number, it takes around 5-7 days to arrive, sometimes the packages may get delayed at your country's custom for several days.

4) Multiple item shipping is OK. Discount shipping prices are given for shipping multiple items in one package to one address: regular price for the 1st item and 30% off for additional items. This discount can only be applied to the item that has lower shipping cost compared with the shipping cost of the 1st item.

5) If you have not got your order within 21 days after your payment is clear, please DO e-mail us your paypal date and your item # and your shipping address, we will track your order, and get your back in 1-2 business days.

6) If you are not satisfied with your order, you can return in 14 days with full money refund (except shipping) as long as the products are in the original shape.



eBay Cross Border Trade powered by Channel Effect
MPN Does Not Apply
Brand aidetek
UPC Does not apply