Brake caliper adapter, front axle, to install the 280mm G60 brake discs, combined with the 4-pistons Porsche Boxter 986er brake caliper.

Specially developed to be able to continue using 15-inch rims!

Suitable for the following vehicles:

• Golf MK1
• Golf MK1 Cabrio
• Caddy 14d
• Jetta 1
• Scirocco

Advantages of this brake system:

• high deceleration, also in conjunction with our rear axle braking system
• specially developed to be able to continue using 15-inch rims.
• brake discs with 4x100 PCD, Therefore, the original Dolf MK1 PCD can be maintained
• thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles. 
• directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
• Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling.

We recommend the brake pads of the Porsche rear calipers, reference 996.352.421. These fit perfectly into the calipers and are perfect for the 280er brake discs! This allows the pads to fit perfectly to the 280 disc without any modification!

Required components:

• brake caliper: 986er Porsche Boxter, reference 986.351.421 / 422  
• brake disc: VW Golf MK2/MK3 G60, 280x22,  reference 6KL 615 301 (only 100% fitting to the specified Porsche calipers)
• brake pads: from the rear calipers,  996.352.421 (these are smaller and look like the G60 brake pad surface)

Delivery:

• 2x brake caliper adapters for VW Golf 1MK Caddy Scirocco , conversion to Porsche brake system
• 4x screws (10.9)
• 1x material certificate 

The corresponding rear axle adapters for the conversion to 280er internally vented brake discs in combination with S3 brake calipers can be found in our shop.

• Einfache TÜV Eintragung
• Qualität Made in Germany
• Faire Preise ohne Zwischenhandel, du kaufst direkt beim Hersteller und Enwickler des Produktes
• Weltweit Nr 1 in Sachen Tuning Adapter
• 15 Jahre Expertenwissen
• 10 Jahre Garantie

• Can I also use other brake discs as specified in the required components?

• No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: (Link nicht verfügbar)

• Can I also use other brake calipers as specified in the required components?

• No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the (Link nicht verfügbar) :