Pro Auto-Disk Powder Measure

90429

The Lee Pro Auto-Disk powder measure is perfect for the high volume reloader utilizing a progressive reloading press.

The innovative design will not cut powder and almost totally eliminates leakage, the large hopper with shut-off valve is attached with brass thumb nuts for the ultimate in disk changing convenience.

The positive pull-back lever increases safety. Comes with four disks, swivel adapter and spring return lever with spring. Designed to be mounted on the Lee Pro-1000 and Loadmaster presses with Lee powder-through expander dies.

Attachment: Lee powder-through expanding dies or Rifle powder charging die (Sold separately)

Includes:

• Four disks with 6 cavities per disk to measure powder
• Chain to throw powder charge

Notes: The Lee Pro Auto-Disk Powder Measure will work with turret presses when setup properly although it was not designed for this application.

Material: Metal/Plastic

Maximum Powder Charge: 21.1 Grains

Minimum Powder Charge: 2.7 Grains

+

Auto-Disk Powder Measure Double Disk Kit

90195

The Lee Auto-Disk Powder Measure Double Disk Kit raises the hopper of the Lee Pro Auto-Disk Powder Measure so reloaders can stack two disks.

This not only doubles the capacity of the disks, but it makes very fine adjustments possible. Most powders can be adjusted +/-.1 grain with different combinations of disks.

Complete listing of combinations, 4 extra disks, screws and risers are included.

Notes:

• With the addition of this kit the Lee Auto-Disk powder measure can drop up to 28.8 grains of Unique and 42.2 grains of IMR 4064 (this kit will work with all brands of smokeless powder)
• Kit raises powder hopper permitting two disks to be stacked in powder measure.
• Allows the user to double the capacity and make very fine adjustments.
• Most powders can be adjusted up or down in 1/10th grain increments using different combinations of disks.
• Includes list of different combinations, four extra disks (which are the same as those included with the powder measure), longer screws for the powder measure, and riser.

Material: Plastic

Adjustment Type: .1 Grain

Maximum Powder Charge: 42.2 Grains

Minimum Powder Charge: 28.8 Grains

Powder Type: Smokeless Powder