Wheel Slip On Spacers 15 mm 5x100 5x112 66.6 mm Hub Centric 2 PCS for Mercedes

Wheel Slip On Spacers 15 mm 5x100 5x112 66.6 mm Hub Centric 2 PCS for Mercedes

At Caold Technology Pty Ltd, we are the most professional spacer manufacturing company. Many different types of style, every kind of specs available. There is noting we cannot produce. State of the art CNC machining, promising very precise results each and everytime. All spacers are made to order with very quick turnover time of 1 business day. Most importantly, all the machining are done locally in Melbourne, Australia.

Before purchasing our products please be aware of the following:

All of our spacers are custom made to order, and we’re more than happy to tailor them to your specific requirements. However, as we are a manufacturer and not a licensed mechanic, we can only offer limited advice and unfortunately cannot guarantee fitment.
If you’re unsure, we strongly recommend consulting with your local licensed mechanic or professional fitter. They will be able to inspect your setup and advise on the exact specifications required for your desired fitment, as well as confirm compatibility.
Please note that custom made items are non-refundable, specifications cannot be changed after order begins processing, and all aftermarket components are installed and used at buyers own risk. We are not responsible for any damages caused by installation or improper use of the product

Thickness     - 15 mm

PCD               - 5x100 & 5x112

CB                  - 66.6 mm

Bolts              - 10x M14x1.5, tapered with 40mm thread length

Please note that we allow a tolerance of ±0.05-0.1mm on the centre bore sizing to allow for easier installation

Qty: 2pcs

Outer Diameter: 140mm

Lip Height: 8mm

Stud hole diameter: 15mm

Bore depth varies according to thickness

Spacer Thickness   Bore Depth
10mm   ~8mm
12mm   ~10mm
15mm   ~12.5mm
20mm   ~18mm

DISCLAIMER

In cases where the wheel centre bore is <4mm greater than the car centre bore, there is a step on the inside bore of the spacer in order to support the hub centric lip. So the spacer can sit flush on the hub, your vehicle's hub protrusion must not exceed the bore depth, so PLEASE CHECK YOUR HUB PROTRUSION BEFORE PURCHASING! Please see the picture below for how to measure and if you have questions or concerns please contact us

If you place an order and do not mention the hub protrusion to us, we will assume you have checked it and found it to be under the limit. If you do not check and find afterwards that your hub protrusion is too high for the spacers, the buyer will bear the cost of either fixing or replacing the spacers



6061 T6 Aluminium Alloy- T6 temper 6061 has an ultimate tensile strength of at least 290MPa (42,000 psi) and yield strength of at least 250 MPa (35,000 psi). More typical values are 310 MPa (45 ksi) and 270 MPa (39 ksi) respectively.





- Parcels are shipped out generally within one business day after all information is collected

- Shipments will be handled by either Australian Post or Fastway Courier, we determine which to select based on your location.
- Australian Post Express option is available with extra charges applied. If you request the Express post, please contact us and we can arrange that for you.
- International Buyers (not in Australia), We ship worldwide, the charges are as listed it is standard post. 

- At Caold Technology our spacer adapters are made with state-of-the-art CNC machine in Melbourne, Australia, with the highest quality materials (Aluminum 6061-T6).

- All products & services we offer carry corresponding Australian laws & regulations. It is your responsibility, to make sure to use our product correctly. Wheel spacer are legally manufactured and intended for Exhibition Cars only. You are responsible to ensure the suitability and legality of items you intend to buy.
Return Policy (30 days) with 20% restocking fee appliedThe product you purchased with information provided we will do it accordingly, if the fitment is wrong but we did however made it according to your measurements, It will be your expense. If you are unsure about this information, please contact us.
- We accept the return if
the product was wrongly produced due to our ability to deliver your needs
the product was unusable
- We DO NOT accept returns if
you decided not to use it, or don't need it
you used on non intended application and destroyed our product
you have damaged the product beyond repair
Any return items will be customer expense.
One Year Manufacturing Guarantee
At Caold technology, we produce reliable products, this is to give you a peace of mind when you use our product.
- We do not tolerate misuse, misconduct, abusive or improper installation.
- Guarantee does not apply to vehicle with aftermarket performance enhancement such as suspensions upgrades, any large gain of horse power to the wheels.
- Any defects to the product, buyer must take a picture immediately, and let us know.

We also do custom made spacers/adapters (15, 20, 25, 30, 35 mm or more thickness). If you have any enquiry, complaints or feedback. Please email us. Contact us via Ebay. We will do our best to satisfy your needs and answers your question at our best ability.