elecbuy
LED Digital Soldering Iron Station T12 Tip Handle Controller 110V 220V For HAKKO
Features:
1: The power supply is used Apple power adapter, the actual output is stable at 2.5A, the maximum power can be 60w
2: ABS case with non-slip rubber pad on the bottom
3: The handle is made of high temperature resistant silicone wire with a length of 1.2 meters.
4: with T12-K tip
5: Temperature adjustment range: 150-480 degrees (optimal welding temperature 300-380 degrees)
6：Mini size,105x75x36mm
Operation instruction:
Operation instruction:
1: Rotate the encoder to adjust the temperature, slowly turn 1 degree per grid, and fast turn 5 degrees per grid.
2: Press the middle button of the encoder to enter sleep mode. Any encoder action or vibrating handle will exit sleep mode.
3: Double-click the middle button of the encoder to enter the enhanced mode, and any encoder action will exit.
4: In the sleep mode, long press the middle button to turn off the power, re-power on or short press the middle button to boot.
5: Not use it for a while,it will enter sleep mode(default 5 minutes), if you do not use it long time,it will enter soft shutdown mode(default 30 minutes)
6: Press and hold the knob to turn left to enter the shutdown time adjustment. The default 0-30 adjustment unit is minute. When it is set to 0, it will turn off the auto power off function.
7: Press and hold the knob to turn right to enter the sleep time adjustment. The default 0-5 adjustment unit is minute. When it is set to 0, the sleep function is turned off.
2: Press the middle button of the encoder to enter sleep mode. Any encoder action or vibrating handle will exit sleep mode.
3: Double-click the middle button of the encoder to enter the enhanced mode, and any encoder action will exit.
4: In the sleep mode, long press the middle button to turn off the power, re-power on or short press the middle button to boot.
5: Not use it for a while,it will enter sleep mode(default 5 minutes), if you do not use it long time,it will enter soft shutdown mode(default 30 minutes)
6: Press and hold the knob to turn left to enter the shutdown time adjustment. The default 0-30 adjustment unit is minute. When it is set to 0, it will turn off the auto power off function.
7: Press and hold the knob to turn right to enter the sleep time adjustment. The default 0-5 adjustment unit is minute. When it is set to 0, the sleep function is turned off.
Short press to exit each time after the set, or you will not save the data.
Long press to adjust temperature parameters, calibration temperature, default parameter 431
The 8551 op amp is used without commissioning.
Long press to adjust temperature parameters, calibration temperature, default parameter 431
The 8551 op amp is used without commissioning.
Package include:
1 x Soldering Iron Station
1 x T12 handle
1 x T12-K tip
1 x Power cord(US plug in default, if you need EU/UK/AU plug, tell us,thanks)
We accept PayPal only.
1.Items are shipped from china.we will send out within 1 bussiness day after receive the payment.
2.We only ship to ebay confirmed address. So before bidding, please kindly verify your ebay address.
3.Shipping to USA takes 8-18 days in normal condition by E-packet with tracking number.
Shipping to most other countries takes about 12-30 days via Economy Int'l Airmail.
Less than $40, without free tracking number,if you request tracking number,please send ebay message to us.
Over $40,with tracking number free.The shipping time depends on your location and local postal service,as well as the weather condition along the shipping,sometimes may take longer,.please send ebay message to us if you didn't get your package.
4.Express shipping: Extra $20 --$25 will be charged for the first 500 grams for most countries. Send ebay message to us if you need this service.
1.If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please send ebay message to us before you return it.
2.If item is defective in 30 days, We will send you a replacement without extra charger, or offer refund after we receive the defective item.
3.If item is defective after 30 days, you can still send it back to us. We will send you a new one after receiving the defective item. But you have to pay the extra shipping fee.
We are honest seller and do our best to serve you.
So if you have any concerns,please don’t hesitate to send ebay message to us.