Clear strips work best on smooth surfaces. Clean with isopropyl rubbing alcohol by wiping gently. Don't use household cleaners like wipes or sprays because they leave behind a slippery residue.

Separate the strips and remove the black liner—it's the one marked 'wall side'. Now press the strip directly onto the wall where you want to hang your hook. Press along the entire strip for 30 seconds.

Finally, remove the blue liner and press the hook onto the strip firmly for about 30 seconds. The harder you press, the stronger the adhesive bond will be. Wait 1 hour before hanging anything on the hook. This allows the adhesive bond to reach maximum strength. Check your packaging for the correct weight limits.

Hold the hook gently in place (so it doesn't snap your fingers!) but don't press it against the wall.

Remember to never pull the strip towards you. Always pull straight down as slow as you can.

Slowly stretch the strip straight down, keeping your hand against the wall as you go. Keep stretching up to 15 inches until the hook releases from the strip.