The IQDRT6 is a 6 x 4 SDI video router. The unit takes in six SDI video inputs and will route each input to any number of the four outputs. The video inputs are equalised for cable lengths of worst case 150 m, typically 200 m, then are reclocked before being sent to the output. The router will operate with 143, 177 and 270 Mbit/s SDI signals in accordance with SMPTE 259M levels A, B & C. Each input channel has loss of input indication displayed through RollCall and on the card edge. This provides the ability to check the state of an input channel before switching it to an output. The SDI signal standard selection is made automatically and is displayed through RollCall. All input and output channels can be renamed to provide clear channel identification. A terminating analog video reference input is provided for correct timing of video switching. A 270 Mbit/s SDI monitor output is provided on the router, which can display any 270 Mbit/s input Card edge switching control is provided through two rotary switches and a take push button switch. RollCall provides full remote control and unit identification

FEATURES

• 6x4 router for 4:2:2/ 4fsc/ ASI serial digital video signals
• Up to 8 independent 143, 177 or 270 Mbits/s SDI video inputs
• Each input can be routed to any number of the outputs
• Loss of input indication
• Automatic standards selection
• All input and output channels can be renamed
• The video outputs are reclocked and fully restored
• An Analog Reference input is provided for correct timing of video switching
• Remote unit control through RollCall
• Eight memory locations for storage and recall of selectable parameters