Allows you to play your 8 liner, video slots, video poker or games of similar nature in a JAMMA cabinet or a supergun device.
Games of this type use a somewhat standardized 72 pin edge connector for controls and video and audio output along with a 20 pin power edge connector. These games are also known as Pot of Gold (POG) or Cherry Master type games.
This adapter includes the required 20 pin power connector and wire harness, and features a 12V lamp header along with a control map for providing 8 liner specific functions via the typical JAMMA controls.
Please note that this adapter is not suitable for gambling and redemption environments. The adapter does not provide wiring or headers for payout and complex coin or bill acceptor system functions.
Compatibility:
This adapter should be compatible with 8 liner type games that are compatible with the pinout listed here. The adapter has been tested with dozens of games of this type from different manufacturers including:
- Cherry Master
Cherry Bonus
Lucky 8 Lines
- and many, many others...
As always, please check the pinout section to ensure it will work with this adapter.
Pinout:
This adapter follows the following pinout scheme:
Main Edge Connector
| SOLDER SIDE |
PARTS SIDE |
| GND |
GND |
| NC |
NC |
| NC |
NC |
| DBL UP LAMP |
DBL UP LAMP |
| TAKE LAMP |
TAKE LAMP |
| BET LAMP |
BET LAMP |
| BIG LAMP |
BIG LAMP |
| START LAMP |
START LAMP |
| NC |
COUNT KEY |
| COUNT |
COUNT HOPPER |
| LOCK3 |
COUNT3 |
| LOCK2 |
COUNT2 |
| NC |
COUNT KEY IN |
| LOCK1 |
COUNT1 |
| COIN HOPPER |
HOPPER FULL |
| KEY OUT |
PAY OUT |
| TEST |
BOOKS |
| COIN3 |
COIN2 |
| KEY IN |
COIN1 |
| NC |
NC |
| BIG |
BIG |
| NC |
NC |
| NC |
NC |
| DBL |
DBL |
| TAKE |
TAKE |
| BET |
BET |
| SMALL |
SMALL |
| START |
START |
| ADJ |
TICKET NOTCH |
| NC |
TICKET |
| NC |
NC |
| NC |
NC |
| NC |
NC |
| SPK- |
SPK+ |
| VSYNC |
VBLUE |
| VGREEN |
VRED |
(PCB edge connector facing away, list is ordered right to left)
Power Edge Connector (20 Pin)
| 8 LINER FUNCTION |
JAMMA FUNCTION |
| GND |
GND |
| GND |
GND |
| +5V |
+5V |
| +5V |
+12V |
| NC |
NC |
| NC |
NC |
| NC |
NC |
| GND |
GND |
| GND |
GND |
(PCB edge connector facing away, list is ordered right to left)
Control Map:
Some 8 liner functions don’t have a JAMMA equivalent. The following mapping is used to wire these functions to corresponding JAMMA controls.
| 8 LINER FUNCTION |
JAMMA FUNCTION |
| SMALL |
P1 DOWN |
| BIG |
P1 UP |
| BET |
P1 BUTTON 1 |
| TAKE |
P1 BUTTON 2 |
| DOUBLE UP |
P1 BUTTON 3 |
| START |
P1 START |