Hunter Hydrawise Pro-HC WiFi 6 Station Irrigation Controller(Outdoor Use) +  Rain sensor + Qty 7 x 1 inch Solenoids

Combo Includes:
  • Hunter Hydrawise 6 Station WiFi Irrigation Controller
  • Rain Sensor
  • Qty 7 x 1 inch Solenoid with Flow Control & Manual Override (Including Master Solenoid) - Made in Australia
  • Qty 15 x Scotchlok 3M Gel Filled Connectors
  • Qty 1 x 10m Pink Plumbing tape
  • Qty 1 x 1 inch Endcap
  • Qty 1 x 1 inch M/F Adapter
FEATURES:
  • Outdoor model includes contractor friendly door lock
  • Full-functioning controller with touchscreen
  • Wi-Fi enabled for simple and fast connection to the internet
  • 6, 12 and 24 fixed station controllers
  • Dedicated master valve/pump start
  • Large terminal strips and wiring compartment
  • Built-in milliamp sensor across the full range of controllers
  • Warranty period: 2 years
PRO-HC EXTRA FEATURES: 

    • Dedicated master valve/pump start
    • Large terminal strips and wiring compartment 
    • Built-in milliamp sensor for solenoid wire fault monitoring 

ELECTRICAL SPECIFICATIONS: 

    • Transformer input: 120 VAC or 230 VAC (international model)
    • Transformer output (24 VAC): 1 A 
    • Station output (24 VAC): 0.56 A 
    • P/MV: (24 VAC): 0.28 A
    • Sensor inputs: 2 APPROVALS 
    • CE, UL, cUL, C-tick, FCC

RAIN SENSOR:
  • 5m wire length
  • 5 level adjustable rain setting ( inch & mm)
  • No battery Needed
  • Shuts down watering once rain is detected
  • Easy mounting
1 inch Solenoid with Flow Control & Manual Override

Inlet – 1″ BSP Female thread (AS 1722)
Outlet – 1″ BSP Female thread (AS 1722)

Technical Specification

Operating Pressure Range – 20Kpa to 1250Kpa
Power Consumption – 8VA
Frequency – 50Hz
Flow – 100LPM
Voltage – 24VAC
Lead Length – 200mm
Valve Type – Normally Closed
Temperature Range – 2°C – 60°C (Ambient), 2°C – 80°C (Media)

Material

Body – 30%Glass Filled Nylon
Coil Encapsulation – 30%Glass Filled Nylon
Diaphragm – Natural Nitrile Elastomer
Disk Diaphragm – Acetal
Filter – Acetal
Application Area – Liquid, Gas & Light Oil
Made in Australia
WaterMark Approved and Compliant with ATS 5200.030