STRAIGHT LATCH TYPE SATA PC PSU POWER CONNECTOR - BLACK CAPS - DIY - PK OF 5

This product data sheet is originally written in English.


Description:

This is a pack of FIVE BLACK coloured Nylon 66 Sata Latch Type Straight connectors
+ 2 x End Cap and 3 x Mid Cap. (End cap is what you use to cover the pushdown terminals when using connector at end of wire and Mid Cap is what you use when connector is not at ends of wires)

A push down type terminal is one where you 'push' the wire down onto a 'V' shaped terminal that grips and pierces the insulation layer on your wire when you push the wire down into the terminal. This action is what creates the electrical connection - so please make sure you firmly push the wires into the terminals and then cover with the caps provided
This connector is used on the PSU leads to connect to Optical Drives, Hard drives, SSD Drives etc
 
 It is ideal for making extensions and repairing broken connectors.
  • Material: Nylon66
  • 5 Way Housing
  • 5 'Push Down' Terminals
  • Rated Voltage: 350V (AC & DC)
  • Rated Current: 5A
  • RoHS: YES

Please make sure you are confident to attach the wires correctly - so not only in the correct order (see diagram in one of the pics above) but also by either properly crimping your wires into the pins or soldering them in place. Failure to fix your wires properly or in the wrong order will result in a LOUD BANG, more than likely a bit of smoke and more than likely a dead PSU or worse PC!!

If in any doubt let a professional person do this work for you!!

we will not be held liable for failure of this item if all reasonable precautions for fitting and wire assembly etc have not been followed.

And please, please NEVER work on your PC with the power on!

Also available in packs of 5, 10 or 20 connectors


We also stock :-

Molex connectors - Male & Female
Molex Connectors - Pass Thru type
3 Pin & 4 Pin Fan Connectors - Male & Female


+ 2 x End Cap and 3 x Mid Cap. (End cap is what you use to cover the pushdown terminals when using connector at end of wire and Mid Cap is what you use when connector is not at ends of wires) A push down type terminal is one where you 'push' the wire down onto a 'V' shaped terminal that grips and pierces the insulation layer on your wire when you push the wire down into the terminal. This action is what creates the electrical connection - so please make sure you firmly push the wires into the terminals and then cover with the caps provided Please make sure you are confident to attach the wires correctly - so not only in the correct order (see diagram in one of the pics above) but also by either properly crimping your wires into the pins or soldering them in place. Failure to fix your wire
Colour Black
Unit Type Unit
MPN P2GPCSATALFPDOWN5
Brand P2G
Connector A SATA I
Manufacturer Warranty 1 year
EAN Does not apply
Type Connector
Cable Length Not Applicable