3mm Vehicle Boot & Van Lining Velour Carpet

Soft, flexible and fire-retardant automotive lining carpet, available in five practical colours.

Give your car, van, campervan or motorhome interior a clean, professional-looking finish with this flexible velour lining carpet.

The material is made from 100% polypropylene and has a soft velour surface with an approximate thickness of 3mm. It is easy to cut and shape, making it ideal for covering boots, parcel shelves, speaker boxes, wall panels, roof panels and many other vehicle interior surfaces.

Sold by the metre:
Select your required colour from the variation menu.
The roll width is approximately 140cm.
Each quantity represents one metre in length.
Please note: This listing is for raw cut-to-size vehicle lining carpet. It is not a tailored boot mat, moulded carpet set or pre-cut vehicle-specific kit.

Key Features

  • Soft velour-finish automotive lining carpet
  • Made from 100% polypropylene
  • Approximately 3mm thick
  • Flexible and easy to shape around curves and contours
  • Easy to cut to the required size
  • Fire-retardant specification
  • Suitable for car, van and campervan interiors
  • Ideal for parcel shelves and speaker enclosures
  • Suitable for walls, roof panels and interior trim
  • Available in five practical colours
  • Approximately 140cm wide
  • Sold by the whole metre
  • Multiple metres normally supplied continuously

Available Colours

Select your required colour from the variation menu:

  • Anthracite
  • Black
  • Dark Grey
  • Light Grey
  • Smoke

Screen settings, photography and lighting conditions may cause the displayed colour to vary slightly from the material received. Where an exact colour match is important, please consider requesting a sample before ordering.

Product Specification

Product Type Vehicle boot and interior lining carpet
Composition 100% polypropylene
Surface Finish Soft velour finish
Pattern Plain
Thickness Approximately 3mm ±10%
Approximate Roll Width 140cm / 1.4 metres / approximately 55 inches
Length Sold in whole 1-metre increments
Quantity 1 Size 100cm long × approximately 140cm wide
Available Colours Anthracite, Black, Dark Grey, Light Grey and Smoke
Fire Retardant Yes
Average Roll Length Approximately 60 metres
Care Hand wash or cool wash only
MPN Varies by colour

Ideal For

  • Car boot and trunk lining
  • Van and campervan conversions
  • Motorhome interior panels
  • Parcel shelves
  • Speaker boxes and enclosures
  • Subwoofer enclosures
  • Side and rear interior panels
  • Vehicle roof and wall lining
  • Storage compartments
  • Wheel-arch covers
  • Door cards and trim panels
  • Workshop and display panels
  • Custom automotive interior projects
High-wear areas:
This product is primarily an interior lining carpet. Please assess its suitability before using it in heavily trafficked footwells, beneath pedals or in other areas exposed to concentrated wear.

How to Order

  1. Select your required colour from the variation menu.
  2. Measure the total length required for your project.
  3. Enter the required quantity. Each quantity represents one whole metre in length.
Quantity 1 100cm long × approximately 140cm wide
Quantity 2 200cm long × approximately 140cm wide
Quantity 3 300cm long × approximately 140cm wide
Quantity 4 400cm long × approximately 140cm wide
Quantity 5 500cm long × approximately 140cm wide
Quantity 10 10 metres long × approximately 140cm wide
Continuous lengths: Multiple metres will normally be supplied as one continuous piece. For example, quantity 3 will normally be supplied as one piece measuring 300cm long by approximately 140cm wide, subject to the available roll length.

Measuring and Cutting

Measure all surfaces carefully and allow additional material for curves, contours, folded edges, joins and final trimming.

The carpet can be cut using suitable sharp scissors or a sharp craft knife. Always work on a stable, protected surface and follow the cutting tool manufacturer's safety instructions.

For complex shapes, creating a paper or cardboard template before cutting the carpet can help improve accuracy and reduce waste.

Position and test-fit the carpet before applying adhesive. Do not cut the final edge until you are satisfied with the placement.

Fitting and Adhesive Guidance

This listing is for lining carpet only. Adhesive, tools and other fitting materials are not included unless specifically stated elsewhere in the listing.

  • Ensure the surface is clean, dry and free from dust or grease
  • Use an adhesive suitable for automotive carpet and the surface being covered
  • Use an appropriate high-temperature adhesive for vehicle roofs and other heat-exposed areas
  • Test the adhesive on an offcut and a hidden part of the surface first
  • Follow the adhesive manufacturer's application and ventilation instructions
  • Work gradually to avoid wrinkles, trapped air and unwanted creases
  • Allow the adhesive to cure fully before using the vehicle

Some adhesives and solvents may mark, harden or damage the carpet. Always carry out a compatibility test before completing the installation.

Acoustic Use

This product is commonly used for speaker-box lining and vehicle interior trim. Its soft carpeted surface can help create a finished interior and reduce hard, reflective surfaces when correctly installed.

The term “acoustic” does not mean that the material is completely soundproof. Finished acoustic performance will depend on the complete construction, substrate, insulation, adhesive and installation method. No numerical sound-reduction rating is stated for this material.

Cleaning and Care

  • Remove loose dust with a vacuum or soft brush
  • Blot spills promptly rather than rubbing them into the surface
  • Use a mild cleaning product suitable for polypropylene carpet
  • Test cleaning products on an offcut or hidden area first
  • Supplier care guidance is hand wash or cool wash only
  • Avoid bleach, aggressive solvents and abrasive brushes
  • Allow the material to dry fully before enclosing or covering it

Fire-Retardant Information

This vehicle lining carpet is supplied with a fire-retardant specification.

Fire retardant does not mean fireproof. Keep the material away from open flames, sparks, hot exhaust components and excessive direct heat.

Where fire certification is required for a commercial, public-service, regulated or specialist vehicle installation, the buyer should check the current certificate and confirm that it meets the requirements of the intended application.

Important Information

  • This is raw cut-to-size lining carpet and not a tailored or moulded vehicle carpet set.
  • Please select the required colour carefully before completing your order.
  • Screen settings, photography, lighting and different production batches may cause slight colour variations.
  • The nominal thickness is approximately 3mm with a stated tolerance of ±10%.
  • The detailed technical specification states a standard width of 1.4 metres. Measurements may be subject to normal manufacturing and cutting tolerances.
  • Do not install the material where it could obstruct pedals, controls, air vents, wiring access, drainage points or moving components.
  • Do not cover airbags, airbag deployment areas, seat-belt mounting points, safety labels or vehicle identification information.
  • The buyer is responsible for selecting a suitable adhesive and ensuring that the installation method is appropriate for the vehicle and surface being covered.
  • Inspect the complete material and confirm the colour, measurements and specification before cutting or applying adhesive.
  • Material that has been cut, glued, fitted or otherwise altered may not be suitable for return.

Quality Textiles - Honestly Priced