H&R Bilstein B4 Sport Fahrwerk 50 mm für VW Golf V Jetta V Federn Stoßdämpfer
Sie haben hier die Gelegenheit, ein Sportfahrwerk mit Komponenten der renommierten deutschen Markenhersteller Bilstein und H&R für den VW Golf V, Golf V Variant und Jetta V günstig zu erwerben. Die Stoßdämpfer von Bilstein B4 sind gekürzte Dämpfer für Sportfahrwerke und harmonieren deshalb auch mit diesen "tiefen" Federn sehr gut.
Bild #3 zeigt den 50 mm tiefer gelegten Golf V eines zufriedenen Kunden. So oder so ähnlich wird Ihr Fahrzeug nach Einbau des Sportfahrwerks auch aussehen.
Technische Daten und Produktbeschreibung:
- Modelljahr: ab 10.03
- Gutachten: Die Dämpfer sind eintragungsfrei. Die H&R Federn haben ein TÜV-Gutachten.
- Tieferlegung VA / HA: 45-50 mm / 45-50 mm
- Eignung: 2WD und Allrad (4-motion), jedoch nicht passend für den 4-motion beim Golf V Variant!!
- Achtung WICHTIG: Sie müssen unbedingt den Federbein-Durchmesser Ihrer Stoßdämpfer nachmessen und mitteilen. Es gibt zwei Ausführungen: 50 und 55 mm, siehe Bild 2. Bereits ab Werk tiefergelegte Fahrzeuge haben ca. 10-15 mm weniger Tieferlegung.
- Lieferumfang: 1 Komplettset bestehend aus 4 Federn, vorne und hinten, + 4 Bilstein B4 Dämpfern ebenfalls für vorne und hinten.
- Artikelnummer: 185
- Gewicht: 25,3 kg
- Hersteller: H&R Bilstein
- Einbauposition: Vorne und hinten
- Hersteller: H&R Bilstein
- Herstellernummer: 29260-1
- Herstellungsland und -region: Deutschland
Technical data and product description:
You have the opportunity here, a sports suspension with components of the renowned German brand manufacturers Bilstein and H & R for the VW Golf V, Golf V Variant and Jetta V to buy cheap. The shock absorbers of Bilstein B4 are shortened dampers for sports suspension and therefore harmonize well with these "deep" springs very well.- Model year: from 10.03
- Expertise: The dampers are registration free. The H & R springs have one TÜV.
- Lowering front / rear: 45-50 mm / 45-50 mm
- Suitability: 2WD and four-wheel drive (4-motion), however not suitable for the 4-motion Golf V Variant !!
- Attention Important: Be sure to measure and communicate the strut diameter of your shocks. There are two versions: 50 and 55 mm, see picture 2. Already factory-lowered vehicles have about 10-15 mm less lowering.
- Scope of supply: 1 complete set consisting of 4 springs, front and rear, + 4 Bilstein B4 shocks also for front and rear.
Here is the technical data of the kit:
Manufacturer: H & R / Bilstein
- Model: from 10.2003
- Approval: German TÜV papers
- Lowering approx. FA / RA: 45-50 mm / 45-50 mm
- Compatibility springs: 2WD and 4WD (4-motion), however not suitable for Golf V Variant / estate 4-motion
- Important: in the eBay checkout / Paypal message field you have to measure the outer diameter of your struts and tell us. Compare image # 2. Could be 50 mm or 55 mm. Factory-lowered cars have less drop (10-15mm).
- you get: 1 complete set of four springs, front and rear + 4 Bilstein B4 dampers therefore for front and rear axle.
If you are uncertain about the suitability of this kit for your VW, please contact me through eBay's "ASK" function.
The typical delivery time of this bundle in the EU is 4-5 working days.
| Suitability list |
- Article Number: 185
- Weight: 25,3 kg
- Manufacturer: H&R Bilstein
- Einbauposition: Vorne und hinten
- Hersteller: H&R Bilstein
- Herstellernummer: 29260-1
- Herstellungsland und -region: Deutschland
Dati tecnici e descrizione del prodotto:
H&r BILSTEIN B4 Assetto Sportivo 50mm VW Golf V Jetta V Molle Ammortizzatore
- Anno di fabbricazione: dal 10.03
- Competenza: Gli ammortizzatori sono privi di registrazione. Le molle H & R ne hanno una TÜV.
- Abbassamento anteriore / posteriore: 45-50 mm / 45-50 mm
- Idoneità: 2WD e trazione integrale (4 movimenti), tuttavia non adatto per la variante Golf V a 4 movimenti !!
- ATTENZIONE IMPORTANTE: Assicurati di misurare e comunicare il diametro del puntone degli ammortizzatori. Esistono due versioni: 50 e 55 mm, vedi figura 2. I veicoli già abbassati in fabbrica hanno un abbassamento di circa 10-15 mm in meno.
- La fornitura comprende: 1 set completo composto da 4 molle, anteriore e posteriore, + 4 ammortizzatori Bilstein B4 anche per anteriore e posteriore.
Ecco i dati tecnici del kit:
Produttore: H & R / Bilstein
- MODELLO: dal 10.2003
- Omologazione: Documenti TÜV tedeschi
- Abbassamento di ca. FA / RA: 45-50 mm / 45-50 mm
- Molle di compatibilità: 2WD e 4WD (4 movimenti), tuttavia non adatto per Golf V Variant / station wagon 4-motion
- Importante: nel campo del checkout eBay / messaggio Paypal devi misurare il diametro esterno dei tuoi montanti e comunicarcelo. Confronta l'immagine n. 2. Potrebbe essere 50 mm o 55 mm. Le auto abbassate in fabbrica hanno meno cadute (10-15mm).
- Si ottiene: 1 set completo di quattro molle, anteriore e posteriore + 4 ammortizzatori Bilstein B4 quindi per asse anteriore e posteriore.
Se non si è sicuri dell'idoneità di questo kit per la propria VW, contattatemi tramite la funzione "ASK" di eBay.
Il tempo di consegna tipico di questo pacco nell'UE è di 4-5 giorni lavorativi.
| Posición Montaje | Delantero y trasero |
| Hersteller | H&R Bilstein |
| EAN | Nicht zutreffend |
| MPN | 29260-1 |
| Marca | H & R Bilstein |
| País/Región de fabricación | Alemania |
| Einbauposition | Vorne und Hinten |
| Herstellernummer | 29260-1 |
| Herstellungsland und -region | Deutschland |