Exterior Retro-reflective Photocell, Voltage: 12VDC/24VAC/DC, Sensing Distance=30 Feet, Comes with Bracket and Reflector, NEMA 3, 4, 4X, 6P & 13
Set Dark Switch to Dark ON.
Set Sensitivity near Max.
Yellow LED indicates that the
unit is receiving power.
Loosely Mount Photo Eye.
Solidly Mount Reflector, level or
square with and aimed at
the Photo Eye’s Lens.
Adjust Photo Eye until Red LED
is steady. Then tip Up & Down
and Side to Side, until Red LED
goes out. This will determine
the four outer most limits of aim.
Go to center in both directions
(Horizontal & Vertical Center.)
Hold in this spot & tighten. Tap
on the Photo Eye mount to test
stability and accuracy.