Fits Ford Focus ST170, SVT (98-04) Vibra Technics Full Road Kit

The following product is suitable for the: Ford Focus ST170, SVT

This Kit is for Road use, please check our listings for a Race mount kit.

The position of all mountings is described as it would be from the drivers seat. For example, Left Hand mounts are on the Gearbox / passenger side of a Right Hand Drive car.

The Kit contains the following items:
- RH Engine Mount FOR227M. (Quantity 1) OEM Part Number(s): 4344890. This RHS engine mount is designed as a direct replacement for the standard Ford hydraulic mount on Duratec ST engines. It reduces engine movement in all directions therefore giving the car a 'tighter' feel but in "fast road" compound still isolates a significant amount of noise and vibration. It also gives vastly superior comfort and isolation from engine vibration over inferior aftermarket urethane mounts.

- LH Trans Mount FOR244M. (Quantity 1) OEM Part Number(s): 98AB7M121PB 1133020 1133019 1061131 1066070 1092270. This LHS mounting carries approximately half the weight of the powertrain and has to react forces in the three orthogonal planes as well as rotational. The standard mount does an acceptable job controlling engine movement and isolating the cabin from noise and vibration under 'normal' driving conditions. However when subjected to a tuned engine and/or high performance driving conditions more control of engine movement is required. The fitting of FOR244M will substantially reduce vertical and lateral engine movement and the rubber section will still give a degree of isolation from noise and vibration. It also gives vastly superior comfort and isolation from engine vibration over inferior aftermarket urethane mounts. This part is a direct replacement for the Ford OE mount and comes with a new centre nut which we suggest is assembled using thread locking compound. We recommend that this mount is used in conjunction with the RHS mounting FOR239M or FOR227M and torque link bush FOR224B.

- Torque Link FOR250M. (Quantity 1) OEM Part Number(s): 98AB6P082MB 98AB6P082MA 98AB6P082AH 1094519 1061205 1102416 1101077 1105416. The link uses two high quality double bonded rubber bushes. The link metal is a welded steel construction with a tensile and compressive strength in excess of 5 tonnes.

To be sure of the correct fitment, please use the further specification data above to assist you. If you are still uncertain please do not hesitate to contact us with either your UK Car Registration or Chassis Number and we will gladly help you identify the correct parts needed prior to ordering.

Vibra-Technics Mounts are a completely re-engineered Solution

They are not hard versions of standard parts but a completely re-engineered solution, giving improved durability and handling for both road cars and competition cars requiring rubber bushed suspension.

Vibratechnics Uprated Engine Mounts

Vibra-Technics products are designed specifically for high performance applications where a direct replacement for the standard mount is required along with a much higher level of engine control to cope with higher engine outputs and higher road inputs caused by fast driving. The Fast Road mounts give significant improvements in ride and handling without adversely affecting vibration isolation. The competition mounts can also eliminate clearance problems with strut braces, exhaust systems, body panels etc. They improve handling whilst still giving vibration isolation at high engine speeds.
Competition mounts are not recommended for road use.

Vibra-Technics Uprated Suspension Bushes

Vibra-Technics have developed a small range of suspension bushes which are designed to significantly reduce the suspension geometry changes resulting from acceleration, braking and cornering forces. This gives improvements in the car stability and cornering "feel" without limiting normal suspension travel.

We're not just "box movers" we are able to offer in depth technical advise relating to the product or we can provide a fitting service on most of the VAG Group parts we sell in our Nottingham workshop.

C & R Enterprises
The Volkswagen, Audi, Seat and Skoda Specialists

Since 1988 we have been repairing, modifying and selling parts for VAG Group cars
Technical Advisors to "Golf+" magazine for over 10 years
Largest contributor to "vwaudiforum.co.uk"
With our experience we can guide you to the right part for your car
We can problem solve and repair your vehicle in our workshops