Shop Categories
TE Connectivity W28-XQ1A-10 Single Pole Thermal Circuit Breaker 10A AC or DC 32V
 

TE Connectivity 10A Single Pole Thermal Circuit Breaker 

  • BMUK Part # :-167-5677
  • BrandTE Connectivity
  • Mfr. Part No.W28-XQ1A-10
  •  TE Connectivity
TE Connectivity SP Pole RCBO, 10A W28, 1000 A
Product Details

W28 series thermal cut-outs

Flush-mount circuit breaker models to protect apparatus.
Valued for their thermal protection of small electronic assemblies.
Front panel mount.
Fuse holder type.
Resettable.

Max. voltage temp.:250 Vac
32 Vdc
Dielectric:>1500 V
Colour:black
Pin length:6.35 mm
Footprint beyond panel:49.3 mm
Panel thickness:1.5 mm max.
Drilled hole:15.87 mm
Dimensions (mm):W 19.31 x H 19.31
Stockcurrentresistance
no.(A)(Ω)
167-5677100.011

Approvals

  UL 1077, E 69543, CSA,
LR 15734, CS 2190N

Thermal Magnetic Convertible

All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms).

Specifications
Current Rating10A
SeriesW28
Number of PolesSP
Breaking Capacity at Maximum Voltage Rating1000 A
Voltage Rating32 V dc, 250 V ac
Overall Width19.31mm
Mounting StylePanel Mount
 
For a Specification PDF Please  CLICK HERE
 
Thank you for looking, if you have any questions please ask or call us.

Please see our other items for a wide range of Electronic components.

  
   
   
   
   
   
   
   
   
   

Microchip MCP7940M-I/SN Real Time Clock — Calendar, NV SRAM, 64B RAM 8-Pin SOIC

  • BMUK Part # :-761-7627
  • BrandMicrochip
  • Mfr. Part No.MCP7940M-I/SN
Microchip
Product Details

MCP7940M I²C Real-Time Clock/Calendars

The Microchip MCP7940M is Real-Time Clock Calendar (RTCC) that supports I²C communications. The MCP7940M includes a digital trimming circuit for accuracy which can compensate for crystal tolerance and temperature.

The MCP7940M features a multi-functional output that can be configured as an alarm output, to output a selectable frequency square wave or as a general purpose output.

 

Features

2-Wire Serial Interface, I²C™ Compatible: I²C clock rate up to 400 kHz
On-Chip Digital Trimming/Calibration: ±1 ppm resolution, ±129 ppm range
Tracks Hours, Minutes, Seconds, Day of Week, Day, Month and Year
Leap Year Compensated to 2399
12/24 Hour Modes
Oscillator for 32.768 kHz Crystals: Optimised for 6-9 pF crystals
Dual Programmable Alarms
Versatile Output Pin
Wide Operating Voltage Range: 1.8V to 5.5V
Low Typical Timekeeping Current: 1.2μA at 3.3V

 

Real Time Clock Peripherals - Microchip

Specifications
Not what you’re looking for? Select the attributes you require, then click the button below
FunctionsCalendar, NV SRAM
Date FormatDW:DM:M:Y
Time FormatHH:MM:SS
User RAM64B
Bus TypeSerial-I2C
Mounting TypeSurface Mount
Package TypeSOIC
Pin Count8
Dimensions4.9 x 3.9 x 1.25mm
Length4.9mm
Width3.9mm
Height1.25mm
Maximum Operating Supply Voltage5.5 V
Minimum Operating Supply Voltage1.8 V
Maximum Operating Temperature+85 °C
Minimum Operating Temperature-40 °C

Recom RACD60-700/IP67, Constant Current / Constant Voltage LED Driver 60W 38 → 54V 0.7 → 1.1A

  • BMUK Part # :-737-7114
  • BrandRecom
  • Mfr. Part No.RACD60-700/IP67
  • Warranty5Year
Recom
Product Details

Recom 60W Constant Current LED Power Supply, Waterproof (IP67) - RACD60 Series

RACD60 series 60W waterproof constant current LED power supply with a single output, universal AC input and active power factor correction. This 60W waterproof constant current LED power supply has a dual mode of operation: In CV mode the power supply behaves as a fixed voltage source at loads below the preset current limit. In CC mode the power supply behaves as a fixed current source at loads above the preset current limit. These two modes enable the LED power supply to be used with both CV and CC LED modules.

Universal input voltage range
Constant current output
Dual mode CV or CC output 
Active power factor correction
IP67 waterproof enclosure
Connection via 300mm cable
Overload and short circuit protection
EMC to EN55015, EN61347-1, EN61347-2-13
Harmonic current compliance designed to meet EN 61000-3-2 (Class C, full load) and EN 61000-3-3

Note

For Industrial Use Only, not in scope of Regulation (EC) No 125/2009.
MTBF to MIL-HDBK-217F

Approvals

cULs

Standards

UL8750, cUL8750, EN61347

Recom - Constant Current LED Power Supply, IP Rated

Specifications
Not what you’re looking for? Select the attributes you require, then click the button below
Input Voltage90 → 264 V ac
Output Voltage38 → 54V
OperationConstant Current / Constant Voltage
Output Current0.7 → 1.1A
Maximum Output Power60W
AC or DC Input VoltageAC
IP RatingIP67
Voltage Rating90 → 264V ac

Recom RACD60-700/IP67, Constant Current / Constant Voltage LED Driver 60W 38 → 54V 0.7 → 1.1A

  • BMUK Part # :-737-7114
  • BrandRecom
  • Mfr. Part No.RACD60-700/IP67
  • Warranty5Year
Recom
Product Details

Recom 60W Constant Current LED Power Supply, Waterproof (IP67) - RACD60 Series

RACD60 series 60W waterproof constant current LED power supply with a single output, universal AC input and active power factor correction. This 60W waterproof constant current LED power supply has a dual mode of operation: In CV mode the power supply behaves as a fixed voltage source at loads below the preset current limit. In CC mode the power supply behaves as a fixed current source at loads above the preset current limit. These two modes enable the LED power supply to be used with both CV and CC LED modules.

Universal input voltage range
Constant current output
Dual mode CV or CC output 
Active power factor correction
IP67 waterproof enclosure
Connection via 300mm cable
Overload and short circuit protection
EMC to EN55015, EN61347-1, EN61347-2-13
Harmonic current compliance designed to meet EN 61000-3-2 (Class C, full load) and EN 61000-3-3

Note

For Industrial Use Only, not in scope of Regulation (EC) No 125/2009.
MTBF to MIL-HDBK-217F

Approvals

cULs

Standards

UL8750, cUL8750, EN61347

Recom - Constant Current LED Power Supply, IP Rated

Specifications
Not what you’re looking for? Select the attributes you require, then click the button below
Input Voltage90 → 264 V ac
Output Voltage38 → 54V
OperationConstant Current / Constant Voltage
Output Current0.7 → 1.1A
Maximum Output Power60W
AC or DC Input VoltageAC
IP RatingIP67
Voltage Rating90 → 264V ac


YOU MAY ALSO BE INTERESTED IN: