SILVER WIRE SOLDER HARD
5 FEET LONG - 20ga WIRE-
Cadmium FREE Solder -
Silver Solder Wire used in Jewelry Making, Repair work such as sizing and mounting, for assembling silver jewelry, rings and components.
Silver solder comes in 3 grades… the grades are the relative temperature flow points between one and the other. The softer the solder the less content of silver with a lower melting temperature.
Sale is for Solder Wire is 5 Feet long, (Approximately 1/4TOz). - 4.85 Dwt of Hard Silver Solder
.
SPECIFICATIONS: JETS Product # 1925-452H
- Solder WIRE: Silver Content of 75%
- Melt temperature: 1,365°F - 741°C
- Flow temperature: 1,450°F - 788°C
- Solder Wire Thickness: 20ga - 0.032” - 0.81mm
Solder is Lead, Cadmium & Indium FREE 
🔸 Attention: Solder is made to be used with a Torch, NOT with soldering gun or iron.
🟢 We also sell the Flux for the solder visit our store see ebay listing >> https://www.ebay.com/itm/201274688116
Technical Information: -
Repairs: Lower temperature solder is recommended for repair work, especially on pieces that may have been reworked and a high temperature solder may cause a problem.
Assembly Work: In multiple component soldering use the Higher Temperature Solder first, then a medium grade and finally to a soft the lower melting point.
Production: High temperature solder, the Hard grade should be used, with the higher silver content, better match of color and a stronger bond. Allowing future repairs to be performed with the softer solders.
Shipping: Via USPS MAIL
NOTE: Visit JETS INC. our ebay Store, where you can see other grades of Solder along with listings of Alloy Metals, Brass, Copper and Zinc, various gauges of Copper & Brass Wires and a selection of Jewelers Equipment Tools and Supplies. JETSInc.
1E 714 CKP Z M